The reboot and poweroff features are actually part of the Power
Management Unit system controller, thus allow them as its children,
instead of specifying as separate device nodes with syscon phandle.
Without it, the reboot/poweroff feature becomes unavailable.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Signed-off-by: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
---
.../soc/loongson/loongson,ls2k-pmc.yaml | 26 +++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml
index c45f5e7fc0e6..510f6cb0f084 100644
--- a/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml
+++ b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml
@@ -37,6 +37,18 @@ properties:
addition, the PM need according to it to indicate that current
SoC whether support Suspend To RAM.
+ syscon-poweroff:
+ $ref: /schemas/power/reset/syscon-poweroff.yaml#
+ type: object
+ description:
+ Node for power off method
+
+ syscon-reboot:
+ $ref: /schemas/power/reset/syscon-reboot.yaml#
+ type: object
+ description:
+ Node for reboot method
+
required:
- compatible
- reg
@@ -54,4 +66,18 @@ examples:
interrupt-parent = <&liointc1>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
loongson,suspend-address = <0x0 0x1c000500>;
+
+ syscon-reboot {
+ compatible = "syscon-reboot";
+ offset = <0x30>;
+ mask = <0x1>;
+ };
+
+ syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmc>;
+ offset = <0x14>;
+ mask = <0x3c00>;
+ value = <0x3c00>;
+ };
};
--
2.39.3
