Re: [PATCH 1/3] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Apr 26, 2023 at 04:34:34PM -0400, Frank Li wrote:
> This commit introduces a common method for sending messages from the Root Complex
> (RC) to the Endpoint (EP) by utilizing the platform MSI interrupt controller,
> such as ARM GIC, as an EP doorbell. Maps the memory assigned for the BAR region
> by the PCI host to the message address of the platform MSI interrupt controller
> in the PCI EP. As a result, when the PCI RC writes to the BAR region, it triggers
> an IRQ at the EP. This implementation serves as a common method for all endpoint
> function drivers.
> 
> However, it currently supports only one EP physical function due to limitations
> in ARM MSI/IMS readiness.
> 

I've provided generic comments below, but I will do one more thorough review
after seeing epf-test driver patch.

> Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> ---
>  drivers/pci/endpoint/pci-epf-core.c | 109 ++++++++++++++++++++++++++++
>  include/linux/pci-epf.h             |  16 ++++
>  2 files changed, 125 insertions(+)
> 
> diff --git a/drivers/pci/endpoint/pci-epf-core.c b/drivers/pci/endpoint/pci-epf-core.c
> index 355a6f56fcea..94ac82bf84c5 100644
> --- a/drivers/pci/endpoint/pci-epf-core.c
> +++ b/drivers/pci/endpoint/pci-epf-core.c
> @@ -6,10 +6,12 @@
>   * Author: Kishon Vijay Abraham I <kishon@xxxxxx>
>   */
>  
> +#include <linux/irqreturn.h>

Why is this needed?

>  #include <linux/device.h>
>  #include <linux/dma-mapping.h>
>  #include <linux/slab.h>
>  #include <linux/module.h>
> +#include <linux/msi.h>
>  
>  #include <linux/pci-epc.h>
>  #include <linux/pci-epf.h>
> @@ -300,6 +302,113 @@ void *pci_epf_alloc_space(struct pci_epf *epf, size_t size, enum pci_barno bar,
>  }
>  EXPORT_SYMBOL_GPL(pci_epf_alloc_space);
>  
> +static enum irqreturn pci_epf_interrupt_handler(int irq, void *data)

static irqreturn_t

s/pci_epf_interrupt_handler/pci_epf_doorbell_handler

> +{
> +	struct pci_epf *epf = data;
> +
> +	if (epf->event_ops && epf->event_ops->doorbell)
> +		epf->event_ops->doorbell(epf, irq - epf->virq_base);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static void pci_epf_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg)
> +{
> +	struct pci_epc *epc = container_of(desc->dev, struct pci_epc, dev);
> +	struct pci_epf *epf;
> +
> +	/* Todo: Need check correct epf if multi epf supported */
> +	list_for_each_entry(epf, &epc->pci_epf, list) {
> +		if (epf->msg && desc->msi_index < epf->num_msgs)
> +			epf->msg[desc->msi_index] = *msg;
> +	}
> +}
> +
> +int pci_epf_alloc_doorbell(struct pci_epf *epf, u16 num_msgs)
> +{
> +	struct irq_domain *domain;
> +	struct pci_epc *epc;
> +	struct device *dev;
> +	int virq;
> +	int ret;
> +	int i;
> +
> +	epc = epf->epc;
> +	dev = &epc->dev;

"epc_dev" to make it explicit

> +
> +	/*
> +	 * Current only support 1 function.

What does this mean exactly? Even a single EPC can support multiple EPFs

> +	 * PCI IMS(interrupt message store) ARM support have not been
> +	 * ready yet.

No need to mention platform irq controller name.

> +	 */
> +	if (epc->function_num_map != 1)

Why can't you use, epf->func_no?

> +		return -EOPNOTSUPP;
> +
> +	domain = dev_get_msi_domain(dev->parent);
> +	if (!domain)
> +		return -EOPNTSUPP;

Newline

> +	dev_set_msi_domain(dev, domain);
> +
> +	/* use parent of_node to get device id information */
> +	dev->of_node = dev->parent->of_node;
> +

Why do you need of_node assignment inside EPF core?

> +	epf->msg = kcalloc(num_msgs, sizeof(struct msi_msg), GFP_KERNEL);
> +	if (!epf->msg)
> +		return -ENOMEM;
> +
> +	epf->num_msgs = num_msgs;
> +

Move this to the start of the function, after checks.

> +	ret = platform_msi_domain_alloc_irqs(dev, num_msgs, pci_epf_write_msi_msg);
> +	if (ret) {
> +		dev_err(dev, "Can't allocate MSI from system MSI controller\n");

"Failed to allocate MSI"

> +		goto err_mem;

err_free_mem

> +	}
> +
> +	for (i = 0; i < num_msgs; i++) {
> +		virq = msi_get_virq(dev, i);
> +		if (i == 0)
> +			epf->virq_base = virq;
> +
> +		ret = request_irq(virq, pci_epf_interrupt_handler, 0,
> +				  "pci-epf-doorbell", epf);

IRQ name should have an index, otherwise all of them will have the same name.

> +
> +		if (ret) {
> +			dev_err(dev, "Failure request doorbell IRQ\n");

"Failed to request doorbell"

> +			goto err_irq;

err_free_irq

> +		}
> +	}
> +
> +	epf->num_msgs = num_msgs;

Newline

> +	return ret;
> +
> +err_irq:
> +	platform_msi_domain_free_irqs(dev);
> +err_mem:
> +	kfree(epf->msg);
> +	epf->msg = NULL;
> +	epf->num_msgs = 0;
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(pci_epf_alloc_doorbell);
> +
> +void pci_epf_free_doorbell(struct pci_epf *epf)
> +{
> +	struct pci_epc *epc;
> +	int i;
> +
> +	epc = epf->epc;
> +
> +	for (i = 0; i < epf->num_msgs; i++)
> +		free_irq(epf->virq_base + i, epf);
> +
> +	platform_msi_domain_free_irqs(&epc->dev);
> +	kfree(epf->msg);
> +	epf->msg = NULL;
> +	epf->num_msgs = 0;
> +}
> +EXPORT_SYMBOL_GPL(pci_epf_free_doorbell);
> +
>  static void pci_epf_remove_cfs(struct pci_epf_driver *driver)
>  {
>  	struct config_group *group, *tmp;
> diff --git a/include/linux/pci-epf.h b/include/linux/pci-epf.h
> index b8441db2fa52..e187e3ee48d2 100644
> --- a/include/linux/pci-epf.h
> +++ b/include/linux/pci-epf.h
> @@ -75,6 +75,7 @@ struct pci_epf_ops {
>  struct pci_epc_event_ops {
>  	int (*core_init)(struct pci_epf *epf);
>  	int (*link_up)(struct pci_epf *epf);
> +	int (*doorbell)(struct pci_epf *epf, int index);
>  };
>  
>  /**
> @@ -173,6 +174,9 @@ struct pci_epf {
>  	unsigned long		vfunction_num_map;
>  	struct list_head	pci_vepf;
>  	const struct pci_epc_event_ops *event_ops;
> +	struct msi_msg *msg;
> +	u16 num_msgs;
> +	int virq_base;
>  };
>  
>  /**
> @@ -216,4 +220,16 @@ int pci_epf_bind(struct pci_epf *epf);
>  void pci_epf_unbind(struct pci_epf *epf);
>  int pci_epf_add_vepf(struct pci_epf *epf_pf, struct pci_epf *epf_vf);
>  void pci_epf_remove_vepf(struct pci_epf *epf_pf, struct pci_epf *epf_vf);
> +int pci_epf_alloc_doorbell(struct pci_epf *epf, u16 nums);
> +void pci_epf_free_doorbell(struct pci_epf *epf);
> +
> +static inline struct msi_msg *epf_get_msg(struct pci_epf *epf)
> +{
> +	return epf->msg;
> +}
> +
> +static inline u16 epf_get_msg_num(struct pci_epf *epf)
> +{
> +	return epf->num_msgs;
> +}

I don't see a need for these two functions as they are doing just dereferences.

- Mani

>  #endif /* __LINUX_PCI_EPF_H */
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux