Re: [PATCH V3 2/4] phy: qcom-m31: Add compatible, phy init sequence for IPQ5018

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 1 Sept 2023 at 12:27, Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx> wrote:
>
> Add phy init sequence and compatible string for IPQ5018
> chipset.
>
> Signed-off-by: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
> ---
> V3:
>         Dropped 0 delay inits.
>         Added static const type for m31_ipq5018_regs.
> V2:
>         Updated the commit message.
> ---
>  drivers/phy/qualcomm/phy-qcom-m31.c | 49 +++++++++++++++++++++++++++++
>  1 file changed, 49 insertions(+)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-m31.c b/drivers/phy/qualcomm/phy-qcom-m31.c
> index ed08072ca032..ceee38695d7d 100644
> --- a/drivers/phy/qualcomm/phy-qcom-m31.c
> +++ b/drivers/phy/qualcomm/phy-qcom-m31.c
> @@ -82,6 +82,48 @@ struct m31_priv_data {
>         unsigned int                    nregs;
>  };
>
> +static const struct m31_phy_regs m31_ipq5018_regs[] = {
> +       {

C99 initializers, please?

> +               USB_PHY_CFG0,
> +               UTMI_PHY_OVERRIDE_EN
> +       },
> +       {
> +               USB_PHY_UTMI_CTRL5,
> +               POR_EN,
> +               15
> +       },
> +       {
> +               USB_PHY_FSEL_SEL,
> +               FREQ_SEL
> +       },
> +       {
> +               USB_PHY_HS_PHY_CTRL_COMMON0,
> +               COMMONONN | FSEL | RETENABLEN
> +       },
> +       {
> +               USB_PHY_REFCLK_CTRL,
> +               CLKCORE
> +       },
> +       {
> +               USB_PHY_UTMI_CTRL5,
> +               POR_EN
> +       },
> +       {
> +               USB_PHY_HS_PHY_CTRL2,
> +               USB2_SUSPEND_N_SEL | USB2_SUSPEND_N | USB2_UTMI_CLK_EN
> +       },
> +       {
> +               USB_PHY_UTMI_CTRL5
> +       },
> +       {
> +               USB_PHY_HS_PHY_CTRL2,
> +               USB2_SUSPEND_N | USB2_UTMI_CLK_EN
> +       },
> +       {
> +               USB_PHY_CFG0

What is the value written? While it didn't make sense to write 0
delays, it is sensible to write 0 register values here.

> +       },
> +};
> +
>  struct m31_phy_regs m31_ipq5332_regs[] = {
>         {
>                 USB_PHY_CFG0,
> @@ -268,6 +310,12 @@ static int m31usb_phy_probe(struct platform_device *pdev)
>         return PTR_ERR_OR_ZERO(phy_provider);
>  }
>
> +static const struct m31_priv_data m31_ipq5018_data = {
> +       .ulpi_mode = false,
> +       .regs = m31_ipq5018_regs,
> +       .nregs = ARRAY_SIZE(m31_ipq5018_regs),
> +};
> +
>  static const struct m31_priv_data m31_ipq5332_data = {
>         .ulpi_mode = false,
>         .regs = m31_ipq5332_regs,
> @@ -275,6 +323,7 @@ static const struct m31_priv_data m31_ipq5332_data = {
>  };
>
>  static const struct of_device_id m31usb_phy_id_table[] = {
> +       { .compatible = "qcom,ipq5018-usb-hsphy", .data = &m31_ipq5018_data },
>         { .compatible = "qcom,ipq5332-usb-hsphy", .data = &m31_ipq5332_data },
>         { },
>  };
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>


-- 
With best wishes
Dmitry



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux