Re: [PATCH v2 2/3] watchdog: stm32_iwdg: Add pretimeout support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 8/6/23 16:19, Guenter Roeck wrote:
On Wed, May 17, 2023 at 09:43:48PM +0200, Marek Vasut wrote:
The STM32MP15xx IWDG adds registers which permit this IP to generate
pretimeout interrupt. This interrupt can also be used to wake the CPU
from suspend. Implement support for generating this interrupt and let
userspace configure the pretimeout. In case the pretimeout is not
configured by user, set pretimeout to half of the WDT timeout cycle.

[...]

  static int stm32_iwdg_probe(struct platform_device *pdev)
  {
  	struct device *dev = &pdev->dev;
@@ -253,6 +340,11 @@ static int stm32_iwdg_probe(struct platform_device *pdev)
  	wdd->max_hw_heartbeat_ms = ((RLR_MAX + 1) * wdt->data->max_prescaler *
  				    1000) / wdt->rate;
+ /* Initialize IRQ, this might override wdd->info, hence it is here. */
+	ret = stm32_iwdg_irq_init(pdev, wdt);
+	if (ret)
+		return ret;
+

What if the interrupt fires for whatever reason and the watchdog
isn't registered yet and the driver data is not set and the
watchdog core doesn't know about the watchdog ?

That cannot happen since the pretimeout IRQ was not configured yet.
That can only happen once the core is aware of the WDT and calls set_pretimeout .



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux