On 8/31/23 06:44, Adam Ford wrote:
The i.MX8MP has a micfil controller which is used for interfacing
with a pulse density microphone. Add the node and mark it as
disabled by default.
Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
---
V3: The AUDIOMIX_PDM_ROOT doesn't exist and the real clock is
called IMX8MP_CLK_AUDIOMIX_PDM_SEL, so swap it out.
V2: No change
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 3167706d81e1..341fd0369ce9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -1479,6 +1479,27 @@ easrc: easrc@30c90000 {
fsl,asrc-format = <2>;
status = "disabled";
};
+
+ micfil: audio-controller@30ca0000 {
+ compatible = "fsl,imx8mp-micfil";
+ reg = <0x30ca0000 0x10000>;
+ #sound-dai-cells = <0>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_PDM_IPG>,
+ <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_PDM_SEL>,
+ <&clk IMX8MP_AUDIO_PLL1_OUT>,
+ <&clk IMX8MP_AUDIO_PLL2_OUT>,
+ <&clk IMX8MP_CLK_EXT3>;
+ clock-names = "ipg_clk", "ipg_clk_app",
+ "pll8k", "pll11k", "clkext3";
+ dmas = <&sdma2 24 25 0x80000000>;
+ dma-names = "rx";
Is dma-names really required if there is only a single DMA channel in DT ?
