Hi Josh,
On 18/12/2014 at 16:51:05 +0800, Josh Wu wrote :
> For sama5d3xmb board, the pins: pinctrl_isi_{power,reset} is used to
> power-down or reset camera sensor.
>
> So we should let camera sensor instead of ISI to configure the pins.
> This patch will change pinctrl name from pinctrl_isi_{power,reset} to
> pinctrl_sensor_{power,reset}.
>
> Signed-off-by: Josh Wu <josh.wu@xxxxxxxxx>
> ---
> arch/arm/boot/dts/sama5d3.dtsi | 2 ++
> arch/arm/boot/dts/sama5d3xmb.dtsi | 6 ++----
> 2 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
> index ed734e9..ff0fa3a 100644
> --- a/arch/arm/boot/dts/sama5d3.dtsi
> +++ b/arch/arm/boot/dts/sama5d3.dtsi
> @@ -214,6 +214,8 @@
> compatible = "atmel,at91sam9g45-isi";
> reg = <0xf0034000 0x4000>;
> interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_isi_data_0_7>;
This should probably not be is that patch.
> clocks = <&isi_clk>;
> clock-names = "isi_clk";
> status = "disabled";
> diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
> index 6af1cba..0aaebc6 100644
> --- a/arch/arm/boot/dts/sama5d3xmb.dtsi
> +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
> @@ -60,8 +60,6 @@
> };
>
> isi: isi@f0034000 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_isi_data_0_7 &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>;
> };
>
> mmc1: mmc@f8000000 {
> @@ -122,12 +120,12 @@
> <AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD31 periph B ISI_MCK */
> };
>
> - pinctrl_isi_reset: isi_reset-0 {
> + pinctrl_sensor_reset: sensor_reset-0 {
> atmel,pins =
> <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE24 gpio */
> };
>
> - pinctrl_isi_power: isi_power-0 {
> + pinctrl_sensor_power: sensor_power-0 {
> atmel,pins =
> <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */
> };
> --
> 1.9.1
>
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
