On 31/08/2023 10:20, Jagadeesh Kona wrote: > > > On 7/7/2023 9:27 AM, Jagadeesh Kona wrote: >> Add bindings, driver and devicetree node for camera clock controller on >> SM8550. >> >> Changes in v6: >> - Updated parent map and frequency table of cam_cc_xo_clk_src to use >> active only source P_BI_TCXO_AO instead of P_BI_TCXO >> >> Changes in v5: >> - Added clk_lucid_ole_pll_configure() to configure lucid ole PLL's >> - Used module_platform_driver() instead of subsys_initcall() >> - Fixed overloading .l config with CAL_L and RINGOSC_CAL_L fields >> >> Changes in v4: >> - Dropped the extra patches added in v2, since the review comments on >> v3 recommended an alternate solution >> >> Changes in v3: >> - Squashed 2 extra patches added in v2 into single patch as per review >> comments >> >> Changes in v2: >> - Took care of review comments from v1 >> + Removed new YAML file and reused SM8450 CAMCC YAML file for SM8550 >> + Sorted the PLL names in proper order >> + Updated all PLL configurations to lower case hex >> + Reused evo ops instead of adding new ops for ole pll >> + Moved few clocks to separate patch to fix patch too long error >> + Padded non-zero address part to 8 hex digits in DT change >> - Added 2 extra patches updating .l config value across chipsets to >> include CAL_L and RINGOSC_CAL_L fields and removed setting CAL_L >> field explicitly in clk_lucid_evo_pll_configure(). >> >> v1: >> - Initial CAMCC changes for SM8550 >> >> Previous series: >> v5 - https://patchwork.kernel.org/project/linux-clk/list/?series=759863 >> v4 - https://patchwork.kernel.org/project/linux-clk/list/?series=755683 >> v3 - https://patchwork.kernel.org/project/linux-clk/list/?series=753150 >> v2 - https://patchwork.kernel.org/project/linux-clk/list/?series=751058 >> v1 - https://patchwork.kernel.org/project/linux-clk/list/?series=749294 >> >> Jagadeesh Kona (5): >> dt-bindings: clock: qcom: Add SM8550 camera clock controller >> clk: qcom: clk-alpha-pll: Add support for lucid ole pll configure >> clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550 >> clk: qcom: camcc-sm8550: Add support for qdss, sleep and xo clocks >> arm64: dts: qcom: sm8550: Add camera clock controller >> >> .../bindings/clock/qcom,sm8450-camcc.yaml | 8 +- >> arch/arm64/boot/dts/qcom/sm8550.dtsi | 15 + >> drivers/clk/qcom/Kconfig | 7 + >> drivers/clk/qcom/Makefile | 1 + >> drivers/clk/qcom/camcc-sm8550.c | 3564 +++++++++++++++++ >> drivers/clk/qcom/clk-alpha-pll.c | 29 + >> drivers/clk/qcom/clk-alpha-pll.h | 2 + >> include/dt-bindings/clock/qcom,sm8550-camcc.h | 187 + >> 8 files changed, 3811 insertions(+), 2 deletions(-) >> create mode 100644 drivers/clk/qcom/camcc-sm8550.c >> create mode 100644 include/dt-bindings/clock/qcom,sm8550-camcc.h >> > > Hi Bjorn, > > All patches in this series are in reviewed state, could you please help > to pick this series in the next release? Thanks! We are in merge window, so please refrain from simple pings for patchsets which are not fixes. Best regards, Krzysztof
