The "probe-type" property was only needed when used with the
(long obsolete) "direct-mapped" compatible value.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
arch/mips/boot/dts/ingenic/jz4725b.dtsi | 1 -
arch/mips/boot/dts/ingenic/jz4770.dtsi | 1 -
2 files changed, 2 deletions(-)
diff --git a/arch/mips/boot/dts/ingenic/jz4725b.dtsi b/arch/mips/boot/dts/ingenic/jz4725b.dtsi
index acbbe8c4664c110e..c5c5a094c37d2e08 100644
--- a/arch/mips/boot/dts/ingenic/jz4725b.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4725b.dtsi
@@ -366,7 +366,6 @@ bch: ecc-controller@130d0000 {
rom: memory@1fc00000 {
compatible = "mtd-rom";
- probe-type = "map_rom";
reg = <0x1fc00000 0x2000>;
bank-width = <4>;
diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
index 9c0099919db7aba9..504e895e916e57bf 100644
--- a/arch/mips/boot/dts/ingenic/jz4770.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
@@ -461,7 +461,6 @@ usb_otg: usb@13440000 {
rom: memory@1fc00000 {
compatible = "mtd-rom";
- probe-type = "map_rom";
reg = <0x1fc00000 0x2000>;
bank-width = <4>;
--
2.34.1
