Add LLCC support for multi channel DDR configuration based on a feature register. Signed-off-by: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx> --- drivers/soc/qcom/llcc-qcom.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c index cbef8d825361..c31d9e39e864 100644 --- a/drivers/soc/qcom/llcc-qcom.c +++ b/drivers/soc/qcom/llcc-qcom.c @@ -12,6 +12,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/mutex.h> +#include <linux/nvmem-consumer.h> #include <linux/of.h> #include <linux/regmap.h> #include <linux/sizes.h> @@ -995,6 +996,24 @@ static int qcom_llcc_cfg_program(struct platform_device *pdev, return ret; } +static int qcom_llcc_get_cfg_index(struct platform_device *pdev, u8 *cfg_index, int num_config) +{ + int ret; + + ret = nvmem_cell_read_u8(&pdev->dev, "multi-chan-ddr", cfg_index); + if (ret == -ENOENT || ret == -EOPNOTSUPP) { + if (num_config > 1) + return -EINVAL; + *cfg_index = 0; + return 0; + } + + if (!ret && *cfg_index >= num_config) + ret = -EINVAL; + + return ret; +} + static int qcom_llcc_remove(struct platform_device *pdev) { /* Set the global pointer to a error code to avoid referencing it */ @@ -1031,6 +1050,7 @@ static int qcom_llcc_probe(struct platform_device *pdev) const struct qcom_llcc_config *cfg; const struct llcc_slice_config *llcc_cfg; u32 sz; + u8 cfg_index; u32 version; struct regmap *regmap; @@ -1052,7 +1072,10 @@ static int qcom_llcc_probe(struct platform_device *pdev) ret = -EINVAL; goto err; } - cfg = &cfgs->llcc_config[0]; + ret = qcom_llcc_get_cfg_index(pdev, &cfg_index, cfgs->num_config); + if (ret) + goto err; + cfg = &cfgs->llcc_config[cfg_index]; ret = regmap_read(regmap, cfg->reg_offset[LLCC_COMMON_STATUS0], &num_banks); if (ret) -- 2.41.0