On Tue, 29 Aug 2023 at 17:00, Praveenkumar I <quic_ipkumar@xxxxxxxxxxx> wrote: > > Add SS UNIPHY and update controller node for USB3. > > Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx> > --- > This patch depends on the below series which adds support for USB2 in > IPQ5332 > https://lore.kernel.org/all/cover.1692699472.git.quic_varada@xxxxxxxxxxx/ > > arch/arm64/boot/dts/qcom/ipq5332.dtsi | 39 ++++++++++++++++++++++----- > 1 file changed, 32 insertions(+), 7 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi > index e6baf694488c..7fbe6c9f4784 100644 > --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi > +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi > @@ -158,6 +158,27 @@ usbphy0: phy@7b000 { > status = "disabled"; > }; > > + ssuniphy0: ssuniphy@4b0000 { > + compatible = "qcom,ipq5332-usb-ssphy"; > + reg = <0x4b0000 0x800>; > + clocks = <&gcc GCC_USB0_PIPE_CLK>, > + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, > + <&gcc GCC_PCIE3X1_PHY_AHB_CLK>; > + > + #clock-cells = <0>; > + clock-output-names = "usb_pcie_wrapper_pipe_clk"; > + > + clock-names = "pipe", > + "phy_cfg_ahb", > + "phy_ahb"; > + > + resets = <&gcc GCC_USB0_PHY_BCR>; > + reset-names = "por_rst"; > + #phy-cells = <0>; > + qcom,phy-mux-sel = <&tcsr 0x10540 0x1>; > + status = "disabled"; > + }; > + > qfprom: efuse@a4000 { > compatible = "qcom,ipq5332-qfprom", "qcom,qfprom"; > reg = <0x000a4000 0x721>; > @@ -313,30 +334,34 @@ usb: usb@8a00000 { > clocks = <&gcc GCC_USB0_MASTER_CLK>, > <&gcc GCC_SNOC_USB_CLK>, > <&gcc GCC_USB0_SLEEP_CLK>, > - <&gcc GCC_USB0_MOCK_UTMI_CLK>; > + <&gcc GCC_USB0_MOCK_UTMI_CLK>, > + <&gcc GCC_USB0_AUX_CLK>, > + <&gcc GCC_USB0_LFPS_CLK>; > + > clock-names = "core", > "iface", > "sleep", > - "mock_utmi"; > + "mock_utmi", > + "aux", > + "lfps"; > > resets = <&gcc GCC_USB_BCR>; > > - qcom,select-utmi-as-pipe-clk; > - > #address-cells = <1>; > #size-cells = <1>; > ranges; > > status = "disabled"; > > - usb2_0_dwc: usb@8a00000 { > + usb3_0_dwc: usb@8a00000 { At this point you have broken compilation of all ipq5332 DT files. Don't. The kernel should be bisectable. At each point, after each commit it should compile and work. > compatible = "snps,dwc3"; > reg = <0x08a00000 0xe000>; > clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>; > clock-names = "ref"; > interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; > - phy-names = "usb2-phy"; > - phys = <&usbphy0>; > + phy-names = "usb2-phy", "usb3-phy"; > + phys = <&usbphy0>, <&ssuniphy0>; > + > tx-fifo-resize; > snps,is-utmi-l1-suspend; > snps,hird-threshold = /bits/ 8 <0x0>; > -- > 2.34.1 > -- With best wishes Dmitry
