On 2023/8/29 17:38, Emil Renner Berthing wrote:
> On Fri, 25 Aug 2023 at 10:16, William Qiu <william.qiu@xxxxxxxxxxxxxxxx> wrote:
>> Add StarFive JH7100 PWM controller node and add PWM pins configuration
>> on VisionFive 2 board.
>
> Hi William,
>
> This is the VisionFive V1 board right?
>
> /Emil
>
Hi Emil,
Yes， it's VisionFive V1, I wrote it wrong.
B.R.
William
>> Signed-off-by: William Qiu <william.qiu@xxxxxxxxxxxxxxxx>
>> ---
>> .../boot/dts/starfive/jh7100-common.dtsi | 24 +++++++++++++++++++
>> arch/riscv/boot/dts/starfive/jh7100.dtsi | 9 +++++++
>> 2 files changed, 33 insertions(+)
>>
>> diff --git a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
>> index b93ce351a90f..746867b882b0 100644
>> --- a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
>> +++ b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
>> @@ -84,6 +84,24 @@ GPO_I2C2_PAD_SDA_OEN,
>> };
>> };
>>
>> + pwm_pins: pwm-0 {
>> + pwm-pins {
>> + pinmux = <GPIOMUX(7,
>> + GPO_PWM_PAD_OUT_BIT0,
>> + GPO_PWM_PAD_OE_N_BIT0,
>> + GPI_NONE)>,
>> + <GPIOMUX(5,
>> + GPO_PWM_PAD_OUT_BIT1,
>> + GPO_PWM_PAD_OE_N_BIT1,
>> + GPI_NONE)>;
>> + bias-disable;
>> + drive-strength = <35>;
>> + input-disable;
>> + input-schmitt-disable;
>> + slew-rate = <0>;
>> + };
>> + };
>> +
>> uart3_pins: uart3-0 {
>> rx-pins {
>> pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
>> @@ -154,6 +172,12 @@ &osc_aud {
>> clock-frequency = <27000000>;
>> };
>>
>> +&ptc {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pwm_pins>;
>> + status = "okay";
>> +};
>> +
>> &uart3 {
>> pinctrl-names = "default";
>> pinctrl-0 = <&uart3_pins>;
>> diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi
>> index 4218621ea3b9..7f5bb19e636e 100644
>> --- a/arch/riscv/boot/dts/starfive/jh7100.dtsi
>> +++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi
>> @@ -248,5 +248,14 @@ watchdog@12480000 {
>> resets = <&rstgen JH7100_RSTN_WDTIMER_APB>,
>> <&rstgen JH7100_RSTN_WDT>;
>> };
>> +
>> + ptc: pwm@12490000 {
>> + compatible = "starfive,jh7100-pwm";
>> + reg = <0x0 0x12490000 0x0 0x10000>;
>> + clocks = <&clkgen JH7100_CLK_PWM_APB>;
>> + resets = <&rstgen JH7100_RSTN_PWM_APB>;
>> + #pwm-cells = <3>;
>> + status = "disabled";
>> + };
>> };
>> };
>> --
>> 2.34.1
>>
>>
>> _______________________________________________
>> linux-riscv mailing list
>> linux-riscv@xxxxxxxxxxxxxxxxxxx
>> http://lists.infradead.org/mailman/listinfo/linux-riscv
