On Tue, 29 Aug 2023 at 11:39, Varadarajan Narayanan <quic_varada@xxxxxxxxxxx> wrote: > > Enable USB2 in host mode. > > Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx> > --- > v10: > regulator_s0500 -> regulator-s0500 > "make W=1 ARCH=arm64 -j 16 CHECK_DTBS=y DT_SCHEMA_FILES=qcom,ipq5332-usb-hsphy.yaml dtbs_check" passed > v9: > regulator_fixed_5p0: s0500 -> regulator_fixed_5p0: regulator_s0500 > "make ARCH=arm64 -j 16 CHECK_DTBS=y DT_SCHEMA_FILES=qcom,ipq5332-usb-hsphy.yaml dtbs_check" passed > v6: > Add vdd-supply and corresponding regulator > v1: > Enable usb-phy node > --- > arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts | 23 +++++++++++++++++++++++ > 1 file changed, 23 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts > index f96b0c8..1fe2e39 100644 > --- a/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts > +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts > @@ -12,6 +12,15 @@ > / { > model = "Qualcomm Technologies, Inc. IPQ5332 MI01.6"; > compatible = "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332"; > + > + regulator_fixed_5p0: regulator-s0500 { > + compatible = "regulator-fixed"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <500000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-name = "fixed_5p0"; > + }; > }; > > &blsp1_spi0 { > @@ -79,3 +88,17 @@ > bias-pull-up; > }; > }; > + > +&usbphy0 { > + vdd-supply = <®ulator_fixed_5p0>; > + > + status = "okay"; > +}; > + > +&usb { > + status = "okay"; > +}; > + > +&usb2_0_dwc { > + dr_mode = "host"; > +}; This is not sorted properly. If we follow alphanumeric sorting order, it should be: - usb - usb2_0_dwc - usbphy0 > -- > 2.7.4 > -- With best wishes Dmitry