On 8/29/2023 12:55 AM, Krzysztof Kozlowski wrote:
On 28/08/2023 21:18, Sricharan Ramabadhran wrote:
IPQ5018 has tsens V1.0 IP with 4 sensors.
There is no RPM, so tsens has to manually enabled.
Adding the tsens and nvmem node.
Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/ipq5018.dtsi | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 9f13d2dcdfd5..277b3cfc7f72 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -93,6 +93,29 @@ soc: soc@0 {
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
+ qfprom_nvmem: qfprom_nvmem@a0000 {
Nope. Come on, where do you see such node naming. Please do not send
code from downstream, but work on upstream sources. Open other most
recent DTS, take a look how it is done and try to do something similar.
sure, will fix it up.
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible is always the first property. Then reg.
ok, will fix.
Regards,
Sricharan
