Node uart0_pins should be sorted alphabetically. Signed-off-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx> --- .../jh7110-starfive-visionfive-2.dtsi | 48 +++++++++---------- 1 file changed, 24 insertions(+), 24 deletions(-) diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi index 85f40df93f25..382dfb5e64e4 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -440,30 +440,6 @@ GPOEN_ENABLE, }; }; - uart0_pins: uart0-0 { - tx-pins { - pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX, - GPOEN_ENABLE, - GPI_NONE)>; - bias-disable; - drive-strength = <12>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - - rx-pins { - pinmux = <GPIOMUX(6, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_UART0_RX)>; - bias-disable; /* external pull-up */ - drive-strength = <2>; - input-enable; - input-schmitt-enable; - slew-rate = <0>; - }; - }; - tdm_pins: tdm-0 { tx-pins { pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD, @@ -497,6 +473,30 @@ GPOEN_DISABLE, input-enable; }; }; + + uart0_pins: uart0-0 { + tx-pins { + pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + rx-pins { + pinmux = <GPIOMUX(6, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_UART0_RX)>; + bias-disable; /* external pull-up */ + drive-strength = <2>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + }; }; &tdm { -- 2.38.1