IPQ5018 has tsens v1.0 block with 4 sensors and 1 interrupt.
Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
---
.../bindings/thermal/qcom-tsens.yaml | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 27e9e16e6455..2309bb6dce1b 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -42,6 +42,7 @@ properties:
- qcom,msm8956-tsens
- qcom,msm8976-tsens
- qcom,qcs404-tsens
+ - qcom,ipq5018-tsens
- const: qcom,tsens-v1
- description: v2 of TSENS
@@ -409,4 +410,22 @@ examples:
#qcom,sensors = <16>;
#thermal-sensor-cells = <1>;
};
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ // Example 5 (for any IPQ5018 based SoC-s):
+ tsens5: thermal-sensor@4a9000 {
+ compatible = "qcom,ipq5018-tsens", "qcom,tsens-v1";
+ reg = <0x4a9000 0x1000>, /* TM */
+ <0x4a8000 0x1000>; /* SORT */
+
+ nvmem-cells = <&tsens_calib>;
+ nvmem-cell-names = "calib";
+
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
+
+ #qcom,sensors = <5>;
+ #thermal-sensor-cells = <1>;
+ };
...
--
2.34.1
