IPQ5018 has 4 thermal sensors (zones). With the
critical temperature being 120'C and action is to reboot.
Adding all the 4 zones here.
Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/ipq5018.dtsi | 58 +++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 277b3cfc7f72..8ab82a6e8594 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -263,6 +263,64 @@ frame@b128000 {
};
};
+ thermal-zones {
+ ubi32-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 1>;
+
+ trips {
+ ubi32-critical {
+ temperature = <120000>;
+ hysteresis = <2>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 2>;
+
+ trips {
+ cpu-critical {
+ temperature = <120000>;
+ hysteresis = <2>;
+ type = "critical";
+ };
+ };
+ };
+
+ top-glue-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 3>;
+
+ trips {
+ top_glue-critical {
+ temperature = <120000>;
+ hysteresis = <2>;
+ type = "critical";
+ };
+ };
+ };
+
+ gephy-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 4>;
+
+ trips {
+ gephy-critical {
+ temperature = <120000>;
+ hysteresis = <2>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
--
2.34.1
