Hi Philipp, On 12/18/2014 06:31 PM, Philipp Zabel wrote:
Am Donnerstag, den 18.12.2014, 15:11 +0800 schrieb Liu Ying:This patch supports the video_27m clock which is a fixed factor clock of the pll3_pfd1_540m clock. Signed-off-by: Liu Ying <Ying.Liu@xxxxxxxxxxxxx> --- v1->v2: * None. arch/arm/mach-imx/clk-imx6q.c | 1 + include/dt-bindings/clock/imx6qdl-clock.h | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 4e79da7..9470df3 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -246,6 +246,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); clk[IMX6QDL_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2); clk[IMX6QDL_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8); + clk[IMX6QDL_CLK_VIDEO_27M] = imx_clk_fixed_factor("video_27m", "pll3_pfd1_540m", 1, 20);The HDMI TX isfr clock input is sourced from video_27m, too, according to Table 33-1 "HDMI clocks". I think the parent of clk[IMX6QDL_CLK_HDMI_ISFR] should be changed from "pll3_pfd1_540m" to "video_27m", then.
I'll add a new patch in the next version to change the hdmi_isfr clock's parent. Thanks, Liu Ying
regards Philipp
-- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
