Hi Bjorn,
> -----Original Message-----
> From: Havalige, Thippeswamy
> Sent: Monday, August 28, 2023 2:39 PM
> To: Bjorn Helgaas <helgaas@xxxxxxxxxx>
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux-
> pci@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; bhelgaas@xxxxxxxxxx;
> lpieralisi@xxxxxxxxxx; robh@xxxxxxxxxx; kw@xxxxxxxxx; Simek, Michal
> <michal.simek@xxxxxxx>; krzysztof.kozlowski+dt@xxxxxxxxxx; Gogada,
> Bharat Kumar <bharat.kumar.gogada@xxxxxxx>
> Subject: RE: [PATCH v6 3/3] PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
>
> Hi Bjorn,
>
> Thanks, ll take all your comments and update them in next patch.
>
> Regards,
> Thippeswamy H
>
> > -----Original Message-----
> > From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
> > Sent: Tuesday, August 22, 2023 1:44 AM
> > To: Havalige, Thippeswamy <thippeswamy.havalige@xxxxxxx>
> > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> > linux-kernel@xxxxxxxxxxxxxxx; linux- pci@xxxxxxxxxxxxxxx;
> > devicetree@xxxxxxxxxxxxxxx; bhelgaas@xxxxxxxxxx;
> > lpieralisi@xxxxxxxxxx; robh@xxxxxxxxxx; kw@xxxxxxxxx; Simek, Michal
> > <michal.simek@xxxxxxx>; krzysztof.kozlowski+dt@xxxxxxxxxx; Gogada,
> > Bharat Kumar <bharat.kumar.gogada@xxxxxxx>
> > Subject: Re: [PATCH v6 3/3] PCI: xilinx-xdma: Add Xilinx XDMA Root
> > Port driver
> >
> > On Fri, Aug 18, 2023 at 03:05:07PM +0530, Thippeswamy Havalige wrote:
> > > Add support for Xilinx XDMA Soft IP core as Root Port.
> > >
> > > The Zynq UltraScale+ MPSoCs devices support XDMA soft IP module in
> > > programmable logic.
> > >
> > > The integrated XDMA soft IP block has integrated bridge function
> > > that can act as PCIe Root Port.
> > >
> > > Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@xxxxxxx>
> > > Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xxxxxxx>
> > > ---
> > > changes in v6:
> > > - Replaced chained irq's with regular interrupts.
> >
> > Thanks a million for working this out!
> >
> > Trivial comments below, wait a couple days before reposting in case
> > there are other comments.
> >
> > > +static inline bool xilinx_pl_dma_pcie_link_up(struct pl_dma_pcie
> > > +*port) {
> > > + return (pcie_read(port, XILINX_PCIE_DMA_REG_PSCR) &
> > > + XILINX_PCIE_DMA_REG_PSCR_LNKUP) ? 1 : 0;
> >
> > This function returns bool, so I think true/false would be more
> > appropriate than 1/0.
> >
> > > +static bool xilinx_pl_dma_pcie_valid_device(struct pci_bus *bus,
> > > + unsigned int devfn)
> > > +{
> > > + struct pl_dma_pcie *port = bus->sysdata;
> > > +
> > > + /* Check if link is up when trying to access downstream ports */
> > > + if (!pci_is_root_bus(bus)) {
> > > + /*
> > > + * Checking whether link is up here is a last line of defence,
> > > + * if the link goes down after we check for link-up, we have a
> > > + * problem: if a PIO request is initiated while link-down, the
> > > + * whole controller hangs, and even after link comes up again,
> > > + * previous PIO requests won't work, and a reset of the whole
> > > + * PCIe controller is needed. Henceforth we need link-up
> > check
> > > + * here to avoid sending PIO request when link is down. This
> > > + * check is racy by definition and does not make controller
> > hang
> > > + * if the link goes down after this check is performed.
> >
> > This comment doesn't make sense to me. "If PIO request initiated
> > while link- down, controller hangs ... This check is racy and does not
> > make controller hang if link goes down." Which is it?
In link down scenario, will treat current device as a invalid device.
> > My *guess* is that this check narrows the window but doesn't close it,
> > so if
> > xilinx_pl_dma_pcie_link_up() finds the link up, but the link goes down
> > before
> > pci_generic_config_read() initiates the PIO request, the controller
> > hangs, and a reset is required.
> >
> > > + */
> > > + if (!xilinx_pl_dma_pcie_link_up(port))
> > > + return false;
> > > + } else if (devfn > 0)
> > > + /* Only one device down on each root port */
> > > + return false;
> > > +
> > > + return true;
> > > +}
> >
> > > +/* INTx error interrupts are Xilinx controller specific interrupt,
> > > +used to
> > > + * notify user about error's such as cfg timeout, slave unsupported
> > > +requests,
> >
> > s/error's/errors/
> >
> > > + * fatal and non fatal error etc.
> >
> > > + err = devm_request_irq(dev, irq,
> > xilinx_pl_dma_pcie_intr_handler,
> > > + IRQF_SHARED | IRQF_NO_THREAD,
> > intr_cause[i].sym, port);
> >
> > Rewrap to fit in 80 columns.
> >
> > > + /* Needed for MSI DECODE MODE */
> > > + pcie_write(port, XILINX_PCIE_DMA_IDR_ALL_MASK,
> > XILINX_PCIE_DMA_REG_MSI_LOW_MASK);
> > > + pcie_write(port, XILINX_PCIE_DMA_IDR_ALL_MASK,
> > > +XILINX_PCIE_DMA_REG_MSI_HI_MASK);
> >
> > Rewrap.
> >
> > Bjorn
