From: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
Add documentation under drivers/staging for new fpga manager's
sysfs interface.
Signed-off-by: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
---
v5 : (actually second version, but keeping version numbers
aligned with rest of patch series)
Move document to drivers/staging/fpga/Documentation/ABI
v6 : No change in this patch for v6 of the patch set
---
.../Documentation/ABI/sysfs-class-fpga-manager | 38 ++++++++++++++++++++
1 file changed, 38 insertions(+)
create mode 100644 drivers/staging/fpga/Documentation/ABI/sysfs-class-fpga-manager
diff --git a/drivers/staging/fpga/Documentation/ABI/sysfs-class-fpga-manager b/drivers/staging/fpga/Documentation/ABI/sysfs-class-fpga-manager
new file mode 100644
index 0000000..eb600f2
--- /dev/null
+++ b/drivers/staging/fpga/Documentation/ABI/sysfs-class-fpga-manager
@@ -0,0 +1,38 @@
+What: /sys/class/fpga_manager/<fpga>/name
+Date: October 2014
+KernelVersion: 3.18
+Contact: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
+Description: Name of low level driver.
+
+What: /sys/class/fpga_manager/<fpga>/firmware
+Date: October 2014
+KernelVersion: 3.18
+Contact: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
+Description: Name of the FPGA image file to load using firmware class.
+
+What: /sys/class/fpga_manager/<fpga>/reset
+Date: October 2014
+KernelVersion: 3.18
+Contact: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
+Description: Write 1 to reset the FPGA
+
+What: /sys/class/fpga_manager/<fpga>/state
+Date: October 2014
+KernelVersion: 3.18
+Contact: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
+Description: Read state of fpga framework state machine as a string.
+ Valid states may vary by manufacturer; superset is:
+ * unknown = can't determine state
+ * power_off = FPGA power is off
+ * power_up = FPGA reports power is up
+ * reset = FPGA held in reset state
+ * firmware_request = firmware class request in progress
+ * firmware_request_err = firmware request failed
+ * write_init = FPGA being prepared for programming
+ * write_init_err = Error while preparing FPGA for
+ programming
+ * write = FPGA ready to receive image data
+ * write_err = Error while programming
+ * write_complete = Doing post programming steps
+ * write_complete_err = Error while doing post programming
+ * operating = FPGA is programmed and operating
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
