The SDX65 GCC clock controller expects two required clocks: pcie_pipe_clk and usb3_phy_wrapper_gcc_usb30_pipe_clk. The first one is provided by existing phy node, but second is not yet implemented. qcom-sdx65-mtp.dtb: clock-controller@100000: clocks: [[11, 0], [11, 1], [12]] is too short qcom-sdx65-mtp.dtb: clock-controller@100000: clock-names: ['bi_tcxo', 'bi_tcxo_ao', 'sleep_clk'] is too short Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- arch/arm/boot/dts/qcom/qcom-sdx65.dtsi | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi index 93c6c80dc379..58635bbc1123 100644 --- a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi @@ -204,8 +204,16 @@ soc: soc { gcc: clock-controller@100000 { compatible = "qcom,gcc-sdx65"; reg = <0x00100000 0x001f7400>; - clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; - clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>, + <&pcie_phy>, + <0>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk", + "pcie_pipe_clk", + "usb3_phy_wrapper_gcc_usb30_pipe_clk"; #power-domain-cells = <1>; #clock-cells = <1>; #reset-cells = <1>; -- 2.34.1