The i.MX8MP has an asynchronous sample rate converter which seems to be the same as what is available on the i.MX8M Nano. Signed-off-by: Adam Ford <aford173@xxxxxxxxx> --- V2: No change diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 6f2f50e1639c..79cdd4c066c8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -1453,6 +1453,26 @@ sai7: sai@30c80000 { interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + + easrc: easrc@30c90000 { + compatible = "fsl,imx8mp-easrc", "fsl,imx8mn-easrc"; + reg = <0x30c90000 0x10000>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_ASRC_IPG>; + clock-names = "mem"; + dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>, + <&sdma2 18 23 0> , <&sdma2 19 23 0>, + <&sdma2 20 23 0> , <&sdma2 21 23 0>, + <&sdma2 22 23 0> , <&sdma2 23 23 0>; + dma-names = "ctx0_rx", "ctx0_tx", + "ctx1_rx", "ctx1_tx", + "ctx2_rx", "ctx2_tx", + "ctx3_rx", "ctx3_tx"; + firmware-name = "imx/easrc/easrc-imx8mn.bin"; + fsl,asrc-rate = <8000>; + fsl,asrc-format = <2>; + status = "disabled"; + }; }; sdma3: dma-controller@30e00000 { -- 2.39.2