Re: [PATCH 3/3] clk: qcom: Add SM6115 LPASSCC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 26 Aug 2023 at 12:23, Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxx> wrote:
>
> On 25/08/2023 20:13, Konrad Dybcio wrote:
> > SM6115 (and its derivatives or similar SoCs) have a LPASS clock
> > controller block which provides audio-related resets.
> >
> > Add the required code to support them.
> >
> > Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> > ---
> >  drivers/clk/qcom/Kconfig          |  9 +++++
> >  drivers/clk/qcom/Makefile         |  1 +
> >  drivers/clk/qcom/lpasscc-sm6115.c | 84 +++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 94 insertions(+)
> >
> > diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> > index bd9bfb11b328..df9cf112e4b6 100644
> > --- a/drivers/clk/qcom/Kconfig
> > +++ b/drivers/clk/qcom/Kconfig
> > @@ -1001,6 +1001,15 @@ config SM_GPUCC_8550
> >         Say Y if you want to support graphics controller devices and
> >         functionality such as 3D graphics.
> >
> > +config SM_LPASSCC_6115
> > +     tristate "SM6115 Low Power Audio Subsystem (LPASS) Clock Controller"
> > +     depends on ARM64 || COMPILE_TEST
> > +     select SM_GCC_6115
> > +     help
> > +       Support for the LPASS clock controller on SM6115 devices.
> > +       Say Y if you want to toggle LPASS-adjacent resets within
> > +       this clock controller to reset the LPASS subsystem.
> > +
> >  config SM_TCSRCC_8550
> >       tristate "SM8550 TCSR Clock Controller"
> >       depends on ARM64 || COMPILE_TEST
> > diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> > index 4790c8cca426..61e3c72fe954 100644
> > --- a/drivers/clk/qcom/Makefile
> > +++ b/drivers/clk/qcom/Makefile
> > @@ -128,6 +128,7 @@ obj-$(CONFIG_SM_GPUCC_8250) += gpucc-sm8250.o
> >  obj-$(CONFIG_SM_GPUCC_8350) += gpucc-sm8350.o
> >  obj-$(CONFIG_SM_GPUCC_8450) += gpucc-sm8450.o
> >  obj-$(CONFIG_SM_GPUCC_8550) += gpucc-sm8550.o
> > +obj-$(CONFIG_SM_LPASSCC_6115) += lpasscc-sm6115.o
> >  obj-$(CONFIG_SM_TCSRCC_8550) += tcsrcc-sm8550.o
> >  obj-$(CONFIG_SM_VIDEOCC_8150) += videocc-sm8150.o
> >  obj-$(CONFIG_SM_VIDEOCC_8250) += videocc-sm8250.o
> > diff --git a/drivers/clk/qcom/lpasscc-sm6115.c b/drivers/clk/qcom/lpasscc-sm6115.c
> > new file mode 100644
> > index 000000000000..6aa19e16c53b
> > --- /dev/null
> > +++ b/drivers/clk/qcom/lpasscc-sm6115.c
> > @@ -0,0 +1,84 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright (c) 2022, 2023 Linaro Limited
> > + */
> > +
> > +#include <linux/clk-provider.h>
> > +#include <linux/err.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/regmap.h>
> > +
> > +#include <dt-bindings/clock/qcom,sm6115-lpasscc.h>
> > +
> > +#include "common.h"
> > +#include "reset.h"
> > +
> > +static const struct qcom_reset_map lpass_audiocc_sm6115_resets[] = {
> > +     [LPASS_AUDIO_SWR_RX_CGCR] =  { .reg = 0x98, .bit = 1, .udelay = 500 },
> > +};
> > +
> > +static struct regmap_config lpass_audiocc_sm6115_regmap_config = {
> > +     .reg_bits = 32,
> > +     .reg_stride = 4,
> > +     .val_bits = 32,
> > +     .name = "lpass-audio-csr",
> > +     .max_register = 0x1000,
> > +};
> > +
> > +static const struct qcom_cc_desc lpass_audiocc_sm6115_reset_desc = {
> > +     .config = &lpass_audiocc_sm6115_regmap_config,
> > +     .resets = lpass_audiocc_sm6115_resets,
> > +     .num_resets = ARRAY_SIZE(lpass_audiocc_sm6115_resets),
> > +};
> > +
> > +static const struct qcom_reset_map lpasscc_sm6115_resets[] = {
> > +     [LPASS_SWR_TX_CONFIG_CGCR] = { .reg = 0x100, .bit = 1, .udelay = 500 },
> > +};
> > +
> > +static struct regmap_config lpasscc_sm6115_regmap_config = {
> > +     .reg_bits = 32,
> > +     .reg_stride = 4,
> > +     .val_bits = 32,
> > +     .name = "lpass-tcsr",
> > +     .max_register = 0x1000,
> > +};
> > +
> > +static const struct qcom_cc_desc lpasscc_sm6115_reset_desc = {
> > +     .config = &lpasscc_sm6115_regmap_config,
> > +     .resets = lpasscc_sm6115_resets,
> > +     .num_resets = ARRAY_SIZE(lpasscc_sm6115_resets),
> > +};
> > +
> > +static const struct of_device_id lpasscc_sm6115_match_table[] = {
> > +     {
> > +             .compatible = "qcom,sm6115-lpassaudiocc",
> > +             .data = &lpass_audiocc_sm6115_reset_desc,
> > +     }, {
> > +             .compatible = "qcom,sm6115-lpasscc",
> > +             .data = &lpasscc_sm6115_reset_desc,
> > +     },
> > +     { },
> > +};
> > +MODULE_DEVICE_TABLE(of, lpasscc_sm6115_match_table);
>
> Everything here is almost the same as sc8280xp one, so this should be
> added to sc8280xp. You cut some boilerplate and additional driver.

We have been there. It quickly becomes a nightmare to maintain.
Consider dispcc-sm8250.c

But I agree with you, this code looks too similar. If we expect more
similar lpasscc drivers, which provide no clocks, just several resets,
maybe we can create a common generic wrapper and make resets lists
corresponding driver data?

-- 
With best wishes
Dmitry



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux