Dear Community,
> Without this change the KSZ9477 Evaluation board's Linux (v6.5-rc1)
> shows following device warning:
>
> 'ksz-switch spi1.0: Port 5 interpreting RGMII delay settings based on
> "phy-mode" property, please update device tree to specify
> "rx-internal-delay-ps" and "tx-internal-delay-ps"'
>
> This is not critical, as KSZ driver by itself assigns default value of
> tx delay to 2000 ps (as 'rgmii-txid' is set as PHY mode).
>
> However, to avoid extra warnings in logs - the missing
> 'tx-internal-delay-ps' has been specified with the default value of
> 2000 ps.
>
Gentle ping on this patch.
Claudiu, could you pick it as well?
> Signed-off-by: Lukasz Majewski <lukma@xxxxxxx>
> ---
> arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
> b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts index
> 99cd6d15998b..b66570080894 100644 ---
> a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts +++
> b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts @@ -152,6
> +152,7 @@ label = "cpu";
> ethernet = <&macb0>;
> phy-mode = "rgmii-txid";
> + tx-internal-delay-ps = <2000>;
>
> fixed-link {
> speed = <1000>;
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@xxxxxxx
Attachment:
pgp7ErXl0SZpI.pgp
Description: OpenPGP digital signature
