It is recommended to maintain a sorted order of device tree entries, so
move the gpio_intc node ahead of the uart_AO node.
Fixes: ea254644a228 ("arm64: dts: meson-a1: add gpio_intc node")
Signed-off-by: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index f740153f3c1e..f95f4daef02c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -105,6 +105,16 @@ gpio: bank@400 {
};
+ gpio_intc: interrupt-controller@440 {
+ compatible = "amlogic,meson-a1-gpio-intc",
+ "amlogic,meson-gpio-intc";
+ reg = <0x0 0x0440 0x0 0x14>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts =
+ <49 50 51 52 53 54 55 56>;
+ };
+
uart_AO: serial@1c00 {
compatible = "amlogic,meson-gx-uart",
"amlogic,meson-ao-uart";
@@ -124,16 +134,6 @@ uart_AO_B: serial@2000 {
clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
-
- gpio_intc: interrupt-controller@0440 {
- compatible = "amlogic,meson-a1-gpio-intc",
- "amlogic,meson-gpio-intc";
- reg = <0x0 0x0440 0x0 0x14>;
- interrupt-controller;
- #interrupt-cells = <2>;
- amlogic,channel-interrupts =
- <49 50 51 52 53 54 55 56>;
- };
};
gic: interrupt-controller@ff901000 {
--
2.36.0
