Enable uart5 for imx93-evk board.
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index cafd39130eb8..2b9d47716f75 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -149,6 +149,12 @@ &lpuart1 { /* console */
status = "okay";
};
+&lpuart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
@@ -222,6 +228,15 @@ MX93_PAD_UART1_TXD__LPUART1_TX 0x31e
>;
};
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e
+ MX93_PAD_DAP_TDI__LPUART5_RX 0x31e
+ MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e
+ MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e
+ >;
+ };
+
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe
--
2.34.1
