From: Fabio Estevam <festevam@xxxxxxx>
Currently, after the board reaches the critical temperature, the system
goes through a poweroff mechanism.
In some cases, such behavior does not suit well, as the board may be
unattended in the field and rebooting may be a better approach.
The bootloader may also check the temperature and only allow the boot to
proceed when the temperature is below a certain threshold.
Introduce the 'nxp,reboot-on-critical' property to indicate that the
board will go through a reboot after the critical temperature is reached.
When this property is absent, the default behavior of forcing a shutdown
is kept.
Signed-off-by: Fabio Estevam <festevam@xxxxxxx>
---
.../devicetree/bindings/thermal/imx8mm-thermal.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml
index d2c1e4573c32..9ac70360fd35 100644
--- a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml
@@ -32,6 +32,12 @@ properties:
clocks:
maxItems: 1
+ nxp,reboot-on-critical:
+ description: Property to indicate that the system will go through a reboot
+ after the critical temperature is reached. If absent, the system will
+ go through shutdown after the critical temperature is reached.
+ type: boolean
+
nvmem-cells:
maxItems: 1
description: Phandle to the calibration data provided by ocotp
--
2.34.1
