On Wed, 17 Dec 2014, Guenter Roeck wrote: > On Wed, Dec 17, 2014 at 04:45:25PM +0000, Lee Jones wrote: > > Signed-off-by: David Paris <david.paris@xxxxxx> > > Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx> > > Hi Lee and David, > > I still have a couple of comments below. Sorry I didn't catch those earlier. > > Thanks, > Guenter > > > --- > > drivers/watchdog/Kconfig | 13 ++ > > drivers/watchdog/Makefile | 1 + > > drivers/watchdog/st_wdt.c | 323 ++++++++++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 337 insertions(+) > > create mode 100644 drivers/watchdog/st_wdt.c Chopping all the crud. [...] > > +static struct of_device_id st_wdog_match[] = { > > + { > > + .compatible = "st,stih407-lpc", > > + .data = (void *)&stih407_syscfg, > > Nitpick: typecast to and from void * is not necessary. Actually that's not true, but it is superfluous in this case. I will fix-up. [...] > > +static int st_wdog_probe(struct platform_device *pdev) > > +{ > > + const struct of_device_id *match; > > + struct device_node *np = pdev->dev.of_node; > > + struct st_wdog *st_wdog; > > + struct regmap *regmap; > > + struct resource *res; > > + struct clk *clk; > > + void __iomem *base; > > + uint32_t mode; > > + int ret; [...] > > + clk = clk_get(&pdev->dev, NULL); > > + if (IS_ERR(clk)) { > > + dev_err(&pdev->dev, "Unable to request clock\n"); > > + return PTR_ERR(clk); > > + } > > + clk_prepare_enable(st_wdog->clk); > > How does this work ? st_wdog->clk isn't set yet. Great spot. That should be 'clk'. It works because the LPC clk is already on. > > + > > + st_wdog->dev = &pdev->dev; > > + st_wdog->base = base; > > + st_wdog->clk = clk; > > + st_wdog->syscfg->regmap = regmap; > > + st_wdog->warm_reset = of_property_read_bool(np, "st,warm_reset"); > > + st_wdog->clkrate = clk_get_rate(st_wdog->clk); > > + > > + if (!st_wdog->clkrate) { > > + dev_err(&pdev->dev, "Unable to fetch clock rate\n"); > > I think this is missing > clk_disable_unprepare(); > clk_put(); > > Same for the rest of the error path handling below. Actually instead of clk_put we should be using s/clk_get/devm_clk_get/. You're right about the error paths. I will enforce a better one. Thanks. [...] > > +#ifdef CONFIG_PM > > I think this needs to be CONFIG_PM_SLEEP. > Another option might be to drop the #ifdef entirely and use > __maybe_unused instead. Hmmm... what version is this? [2 mins pass] Oh rubbish. I've been a silly boy! [spoiler alert: take a look at the end of the RTC driver patch] Will be fixed in v3. [...] -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html