On 8/16/2023 10:15 PM, Robert Marko wrote:
IPQ5018 has SDI (Secure Debug Image) enabled by TZ by default, and that means that WDT being asserted or just trying to reboot will hang the board in the debug mode and only pulling the power and repowering will help. Some IPQ4019 boards like Google WiFI have it enabled as well. So, lets add a boolean property to indicate that SDI is enabled by default and thus needs to be disabled by the kernel. Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
Acked-by: Mukesh Ojha <quic_mojha@xxxxxxxxxxx> -Mukesh
--- Changes in v3: * Change the property so it indicates that SDI has been enabled by default --- Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml index 4233ea839bfc..590bbbd61de5 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml @@ -89,6 +89,14 @@ properties: protocol to handle sleeping SCM calls. maxItems: 1+ qcom,sdi-enabled:+ description: + Indicates that the SDI (Secure Debug Image) has been enabled by TZ + by default and it needs to be disabled. + If not disabled WDT assertion or reboot will cause the board to hang + in the debug mode. + type: boolean + qcom,dload-mode: $ref: /schemas/types.yaml#/definitions/phandle-array items:
