The master clock (xvclk) is mandatory. It's a common clock framework clock. It can make sensor output a pixel clock to the camera interface. Cc: devicetree@xxxxxxxxxxxxxxx Signed-off-by: Josh Wu <josh.wu@xxxxxxxxx> Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> --- v3 -> v4: 1. Add Laurent's acked by. v2 -> v3: 1. should return PTR_ERR(). v1 -> v2: 1. change the clock's name. 2. Make the clock is mandatory. drivers/media/i2c/soc_camera/ov2640.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/drivers/media/i2c/soc_camera/ov2640.c b/drivers/media/i2c/soc_camera/ov2640.c index 4c2868c..1d68bcf 100644 --- a/drivers/media/i2c/soc_camera/ov2640.c +++ b/drivers/media/i2c/soc_camera/ov2640.c @@ -13,6 +13,7 @@ * published by the Free Software Foundation. */ +#include <linux/clk.h> #include <linux/init.h> #include <linux/module.h> #include <linux/i2c.h> @@ -31,6 +32,7 @@ #define VAL_SET(x, mask, rshift, lshift) \ ((((x) >> rshift) & mask) << lshift) + /* * DSP registers * register offset for BANK_SEL == BANK_SEL_DSP @@ -284,6 +286,7 @@ struct ov2640_priv { struct v4l2_ctrl_handler hdl; u32 cfmt_code; struct v4l2_clk *clk; + struct clk *master_clk; const struct ov2640_win_size *win; struct soc_camera_subdev_desc ssdd_dt; @@ -746,6 +749,7 @@ static int ov2640_s_power(struct v4l2_subdev *sd, int on) struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); struct ov2640_priv *priv = to_ov2640(client); struct v4l2_clk *clk; + int ret; if (!priv->clk) { clk = v4l2_clk_get(&client->dev, "mclk"); @@ -755,7 +759,20 @@ static int ov2640_s_power(struct v4l2_subdev *sd, int on) priv->clk = clk; } - return soc_camera_set_power(&client->dev, ssdd, priv->clk, on); + if (on) { + ret = clk_prepare_enable(priv->master_clk); + if (ret) + return ret; + } else { + clk_disable_unprepare(priv->master_clk); + } + + ret = soc_camera_set_power(&client->dev, ssdd, priv->clk, on); + + if (ret && on) + clk_disable_unprepare(priv->master_clk); + + return ret; } /* Select the nearest higher resolution for capture */ @@ -1145,6 +1162,10 @@ static int ov2640_probe(struct i2c_client *client, return ret; } + priv->master_clk = devm_clk_get(&client->dev, "xvclk"); + if (IS_ERR(priv->master_clk)) + return PTR_ERR(priv->master_clk); + v4l2_i2c_subdev_init(&priv->subdev, client, &ov2640_subdev_ops); v4l2_ctrl_handler_init(&priv->hdl, 2); v4l2_ctrl_new_std(&priv->hdl, &ov2640_ctrl_ops, -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html