Change PM8058 node labels to start with pm8058_ prefix, following other
Qualcomm PMIC device nodes.
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
.../boot/dts/qcom/qcom-apq8060-dragonboard.dts | 4 ++--
arch/arm/boot/dts/qcom/qcom-msm8660.dtsi | 16 ++++++++--------
2 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
index db4c791b2e2f..48fd1a1feea3 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
@@ -72,7 +72,7 @@ cm3605 {
/* Trig on both edges - getting close or far away */
interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>;
/* MPP05 analog input to the XOADC */
- io-channels = <&xoadc 0x00 0x05>;
+ io-channels = <&pm8058_xoadc 0x00 0x05>;
io-channel-names = "aout";
pinctrl-names = "default";
pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>;
@@ -945,7 +945,7 @@ irq-pins {
};
};
-&xoadc {
+&pm8058_xoadc {
/* Reference voltage 2.2 V */
xoadc-ref-supply = <&pm8058_l18>;
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
index 78023ed2fdf7..9217ced108c4 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
@@ -80,13 +80,13 @@ sleep-clk {
*/
iio-hwmon {
compatible = "iio-hwmon";
- io-channels = <&xoadc 0x00 0x01>, /* Battery */
- <&xoadc 0x00 0x02>, /* DC in (charger) */
- <&xoadc 0x00 0x04>, /* VPH the main system voltage */
- <&xoadc 0x00 0x0b>, /* Die temperature */
- <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
- <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
- <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
+ io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
+ <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
+ <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
+ <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
+ <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+ <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+ <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
};
soc: soc {
@@ -390,7 +390,7 @@ pm8058_keypad: keypad@148 {
row-hold = <91500>;
};
- xoadc: xoadc@197 {
+ pm8058_xoadc: xoadc@197 {
compatible = "qcom,pm8058-adc";
reg = <0x197>;
interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
--
2.39.2
