Change PM8921 node labels to start with pm8921_ prefix, following other
Qualcomm PMIC device nodes.
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 950adb63af70..6514d728b1ec 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -292,13 +292,13 @@ scm {
*/
iio-hwmon {
compatible = "iio-hwmon";
- io-channels = <&xoadc 0x00 0x01>, /* Battery */
- <&xoadc 0x00 0x02>, /* DC in (charger) */
- <&xoadc 0x00 0x04>, /* VPH the main system voltage */
- <&xoadc 0x00 0x0b>, /* Die temperature */
- <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
- <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
- <&xoadc 0x00 0x0e>; /* Charger temperature */
+ io-channels = <&pm8921_xoadc 0x00 0x01>, /* Battery */
+ <&pm8921_xoadc 0x00 0x02>, /* DC in (charger) */
+ <&pm8921_xoadc 0x00 0x04>, /* VPH the main system voltage */
+ <&pm8921_xoadc 0x00 0x0b>, /* Die temperature */
+ <&pm8921_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+ <&pm8921_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+ <&pm8921_xoadc 0x00 0x0e>; /* Charger temperature */
};
soc: soc {
@@ -686,7 +686,7 @@ ssbi@500000 {
reg = <0x00500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
- pmicintc: pmic {
+ pm8921: pmic {
compatible = "qcom,pm8921";
interrupt-parent = <&tlmm_pinmux>;
interrupts = <74 8>;
@@ -721,7 +721,7 @@ pm8921_mpps: mpps@50 {
rtc@11d {
compatible = "qcom,pm8921-rtc";
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8921>;
interrupts = <39 1>;
reg = <0x11d>;
allow-set-time;
@@ -730,16 +730,16 @@ rtc@11d {
pwrkey@1c {
compatible = "qcom,pm8921-pwrkey";
reg = <0x1c>;
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8921>;
interrupts = <50 1>, <51 1>;
debounce = <15625>;
pull-up;
};
- xoadc: xoadc@197 {
+ pm8921_xoadc: xoadc@197 {
compatible = "qcom,pm8921-adc";
reg = <0x197>;
- interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>;
+ interrupts-extended = <&pm8921 78 IRQ_TYPE_EDGE_RISING>;
#address-cells = <2>;
#size-cells = <0>;
#io-channel-cells = <2>;
--
2.39.2
