Move the Ethernet node from the ad-hoc lbsc node to the BSC node,
as its connected to the Bus State Controller. This allows the system to
know the right position of the Ethernet node in the clock and PM domain
hierarchy, and manage the clock and PM domain appropriately.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
Untested
v2:
- New
---
arch/arm/boot/dts/r8a73a4-ape6evm.dts | 35 +++++++++++++++--------------------
1 file changed, 15 insertions(+), 20 deletions(-)
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index 0d50bef0123449f5..44c4cac1820a4dfe 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -72,26 +72,6 @@
regulator-always-on;
};
- lbsc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0 0x20000000>;
-
- ethernet@8000000 {
- compatible = "smsc,lan9220", "smsc,lan9115";
- reg = <0x08000000 0x1000>;
- interrupt-parent = <&irqc1>;
- interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
- phy-mode = "mii";
- reg-io-width = <4>;
- smsc,irq-active-high;
- smsc,irq-push-pull;
- vdd33a-supply = <&ape6evm_fixed_3v3>;
- vddvario-supply = <&ape6evm_fixed_1v8>;
- };
- };
-
leds {
compatible = "gpio-leds";
led1 {
@@ -184,6 +164,21 @@
voltage-tolerance = <1>; /* 1% */
};
+&bsc {
+ ethernet@8000000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0x08000000 0x1000>;
+ interrupt-parent = <&irqc1>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ vdd33a-supply = <&ape6evm_fixed_3v3>;
+ vddvario-supply = <&ape6evm_fixed_1v8>;
+ };
+};
+
&cmt1 {
status = "okay";
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
