With this version I have done with a generic name, in this case 'data', as suggested by Alper Nebi Yasak. This may be controversial, but we may as well have the dicussion now. I assume that there are no other ongoing attempts to define the layout of firmware in devicetree. Signed-off-by: Simon Glass <sjg@xxxxxxxxxxxx> --- Changes in v3: Use data,layout for the layout property Changes in v2: - Reworked significantly based on Alper's comments dtschema/schemas/firmware/image.yaml | 77 +++++++++++++++++++++ dtschema/schemas/firmware/layout/entry.yaml | 77 +++++++++++++++++++++ 2 files changed, 154 insertions(+) create mode 100644 dtschema/schemas/firmware/image.yaml create mode 100644 dtschema/schemas/firmware/layout/entry.yaml diff --git a/dtschema/schemas/firmware/image.yaml b/dtschema/schemas/firmware/image.yaml new file mode 100644 index 0000000..cc052e8 --- /dev/null +++ b/dtschema/schemas/firmware/image.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Google LLC + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware/image.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binman firmware layout + +maintainers: + - Simon Glass <sjg@xxxxxxxxxxxx> + +description: | + The image node provides a layout for firmware, used when packaging firmware + from multiple projects. For now it just supports a very simple set of + features, as a starting point for discussion. + + The Binman tool processes this node to produce a final image which can be + loaded into suitable storage device. Documentation is at: + + https://u-boot.readthedocs.io/en/latest/develop/package/binman.html + + The current image-description format is here: + + https://u-boot.readthedocs.io/en/latest/develop/package/binman.html#image-description-format + + It is desirable to reference the image from the storage-device node, perhaps + using an image-desc property: + + spiflash@0 { + compatible = "spidev", "jedec,spi-nor"; + data,layout = <&image>; + }; + + Note that the intention is to change Binman to use whatever schema is agreed + here. + +properties: + $nodename: + pattern: "^[-a-z]+(-[0-9]+)?$" + + compatible: + const: data,image + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + +required: + - compatible + - "#address-cell" + - "#size-cells" + +additionalProperties: true + +examples: + - | + firmware { + image: image { + compatible = "data,image"; + #address-cells = <1>; + $size-cells = <1>; + + u-boot@0 { + compatible = "data,u-boot"; + reg = <0 0xa0000>; + }; + + atf-bl31@0x100000 { + compatible = "data,atf-bl31"; + reg = <0x100000 0x20000>; + }; + }; + }; diff --git a/dtschema/schemas/firmware/layout/entry.yaml b/dtschema/schemas/firmware/layout/entry.yaml new file mode 100644 index 0000000..29f0dfc --- /dev/null +++ b/dtschema/schemas/firmware/layout/entry.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Google LLC + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware/layout/entry.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Image entry + +maintainers: + - Simon Glass <sjg@xxxxxxxxxxxx> + +description: | + The entry node specifies a single entry in the firmware image. + + Entries have a specific type, such as "u-boot" or "atf-bl31". This is provided + using compatible = "data,<type>". + + Note: This definition is intended to be hierarchical, so that entries can + appear in other entries. Schema for that is TBD. + +properties: + compatible: + $ref: /schemas/types.yaml#/definitions/string + + offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Provides the offset of this entry from the start of its parent section. + + This may be omitted in the description provided by Binman, in which case + the value is calculated as part of image packing. + + size: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Provides the size of this entry in bytes. + + This may be omitted in the description provided by Binman, in which case + the value is calculated as part of image packing. + + reg: + description: | + Defines the offset and size of this entry, with reference to its parent + image / section. + + Note This is typically omitted in the description provided to Binman, + since the value is calculated as part of image packing. Separate + properties are provided for the size and offset of an entry, so that it is + easy to specify none, one or both. The `reg` property is the only one that + needs to be looked at once the image has been built. + +required: + - compatible + +additionalProperties: true + +examples: + - | + firmware { + image: image { + compatible = "data,image"; + #address-cells = <1>; + $size-cells = <1>; + + u-boot@0 { + compatible = "data,u-boot"; + reg = <0 0xa0000>; + }; + + atf-bl31@0x100000 { + compatible = "data,atf-bl31"; + reg = <0x100000 0x20000>; + }; + }; + }; -- 2.42.0.rc1.204.g551eb34607-goog