Add the StarFive JH7110 (TX0/TX1/RX channel) SoC support in the bindings
of Designware I2S controller. The I2S controller needs two reset items
to work properly on the JH7110 SoC. And TX0 channel as master mode needs
5 clock items and TX1/RX channels as slave mode need 9 clock items on
the JH7110 SoC. The RX channel needs System Register Controller property
to enable it and other platforms do not need it.
Signed-off-by: Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>
---
.../bindings/sound/snps,designware-i2s.yaml | 108 +++++++++++++++++-
1 file changed, 105 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
index a970fd264b21..a48d040b0a4f 100644
--- a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
@@ -17,6 +17,9 @@ properties:
- const: snps,designware-i2s
- enum:
- snps,designware-i2s
+ - starfive,jh7110-i2stx0
+ - starfive,jh7110-i2stx1
+ - starfive,jh7110-i2srx
reg:
maxItems: 1
@@ -29,15 +32,36 @@ properties:
maxItems: 1
clocks:
- description: Sampling rate reference clock
- maxItems: 1
+ items:
+ - description: Sampling rate reference clock
+ - description: APB clock
+ - description: Audio master clock
+ - description: Inner audio master clock source
+ - description: External audio master clock source
+ - description: Bit clock
+ - description: Left/right channel clock
+ - description: External bit clock
+ - description: External left/right channel clock
+ minItems: 1
clock-names:
- const: i2sclk
+ items:
+ - const: i2sclk
+ - const: apb
+ - const: mclk
+ - const: mclk_inner
+ - const: mclk_ext
+ - const: bclk
+ - const: lrck
+ - const: bclk_ext
+ - const: lrck_ext
+ minItems: 1
resets:
items:
- description: Optional controller resets
+ - description: controller reset of Sampling rate
+ minItems: 1
dmas:
items:
@@ -51,6 +75,17 @@ properties:
- const: rx
minItems: 1
+ starfive,syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to System Register Controller sys_syscon node.
+ - description: I2S-rx enabled control offset of SYS_SYSCONSAIF__SYSCFG register.
+ - description: I2S-rx enabled control mask
+ description:
+ The phandle to System Register Controller syscon node and the I2S-rx(ADC)
+ enabled control offset and mask of SYS_SYSCONSAIF__SYSCFG register.
+
allOf:
- $ref: dai-common.yaml#
- if:
@@ -66,6 +101,73 @@ allOf:
properties:
"#sound-dai-cells":
const: 0
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: snps,designware-i2s
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+ clock-names:
+ maxItems: 1
+ resets:
+ maxItems: 1
+ else:
+ properties:
+ resets:
+ minItems: 2
+ maxItems: 2
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: starfive,jh7110-i2stx0
+ then:
+ properties:
+ clocks:
+ minItems: 5
+ maxItems: 5
+ clock-names:
+ minItems: 5
+ maxItems: 5
+ required:
+ - resets
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: starfive,jh7110-i2stx1
+ then:
+ properties:
+ clocks:
+ minItems: 9
+ maxItems: 9
+ clock-names:
+ minItems: 9
+ maxItems: 9
+ required:
+ - resets
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: starfive,jh7110-i2srx
+ then:
+ properties:
+ clocks:
+ minItems: 9
+ maxItems: 9
+ clock-names:
+ minItems: 9
+ maxItems: 9
+ required:
+ - resets
+ - starfive,syscon
+ else:
+ properties:
+ starfive,syscon: false
required:
- compatible
--
2.25.1
