Hello, This patch series adds support to thermal system found in H616 SoC. There are 4 thermal sensors in this SoC. One for GPU, CPU, DRAM and VE. Trips while unused for now until cpufreq is implemented (WIP) are required by dt-bindings and thus included here. Cheers, Martin --------------- Hello, Im very much not sure if the trips should be included or not. Since they are not optional part I decided to add them but please let me know. Cheers, Martin Signed-off-by: Martin Botka <martin.botka@xxxxxxxxxxxxxx> --- Changes in v2: - Fix typos - Remove h616 calc and init functions - Use TEMP_CALIB_MASK insteaf of 0xffff - Adjust calibration function to new offset and scale - Add proper comment to bindings patch - Split delta calculations to 2 lines - Add parentheses around caldata[2|3] >> 12 - Negate bindings if for clocks - Link to v1: https://lore.kernel.org/r/20230818-ths-h616-v1-0-0e1e058b9c7a@xxxxxxxxxxxxxx --- Martin Botka (3): dt-bindings: thermal: sun8i: Add binding for H616 THS controller thermal: sun8i: Add support for H616 THS controller arm64: dts: allwinner: h616: Add thermal sensor and thermal zones .../bindings/thermal/allwinner,sun8i-a83t-ths.yaml | 18 ++--- arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 87 ++++++++++++++++++++++ drivers/thermal/sun8i_thermal.c | 74 ++++++++++++++++++ 3 files changed, 169 insertions(+), 10 deletions(-) --- base-commit: df6283416a280d17609f5e55388601458241348c change-id: 20230815-ths-h616-77b2db565249 Best regards, -- Martin Botka <martin.botka@xxxxxxxxxxxxxx>
