Add DeviceTree file for Loongson-2K0500 processor, which integrates one
64-bit dual emission superscalar LA264 processor core.
Signed-off-by: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
---
arch/loongarch/boot/dts/Makefile | 2 +
.../boot/dts/loongson-2k0500-ref.dts | 88 ++++++
arch/loongarch/boot/dts/loongson-2k0500.dtsi | 254 ++++++++++++++++++
3 files changed, 344 insertions(+)
create mode 100644 arch/loongarch/boot/dts/loongson-2k0500-ref.dts
create mode 100644 arch/loongarch/boot/dts/loongson-2k0500.dtsi
diff --git a/arch/loongarch/boot/dts/Makefile b/arch/loongarch/boot/dts/Makefile
index 1e24cdb5180a..aa0b21d73d4e 100644
--- a/arch/loongarch/boot/dts/Makefile
+++ b/arch/loongarch/boot/dts/Makefile
@@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
+dtb-$(CONFIG_MACH_LOONGSON64) = loongson-2k0500-ref.dtb
+
obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .dtb.o, $(CONFIG_BUILTIN_DTB_NAME))
diff --git a/arch/loongarch/boot/dts/loongson-2k0500-ref.dts b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts
new file mode 100644
index 000000000000..5014cc2b367a
--- /dev/null
+++ b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include "loongson-2k0500.dtsi"
+
+/ {
+ compatible = "loongson,ls2k0500-ref", "loongson,ls2k0500";
+ model = "Loongson-2K0500 Reference Board";
+
+ aliases {
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@200000 {
+ device_type = "memory";
+ reg = <0x0 0x200000 0x0 0xee00000>, /* 238 MB at 2 MB */
+ <0x0 0x90000000 0x0 0x60000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x2000000>;
+ linux,cma-default;
+ };
+ };
+};
+
+&gmac0 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ bus_id = <0x0>;
+};
+
+&gmac1 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ bus_id = <0x1>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ eeprom@57{
+ compatible = "atmel,24c16";
+ reg = <0x57>;
+ pagesize = <16>;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&rtc0 {
+ status = "okay";
+};
diff --git a/arch/loongarch/boot/dts/loongson-2k0500.dtsi b/arch/loongarch/boot/dts/loongson-2k0500.dtsi
new file mode 100644
index 000000000000..b45d1c217a6c
--- /dev/null
+++ b/arch/loongarch/boot/dts/loongson-2k0500.dtsi
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ compatible = "loongson,la264";
+ device_type = "cpu";
+ reg = <0x0>;
+ clocks = <&cpu_clk>;
+ };
+ };
+
+ cpu_clk: cpu-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <500000000>;
+ };
+
+ cpuintc: interrupt-controller {
+ compatible = "loongson,cpu-interrupt-controller";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+
+ bus@10000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
+ <0x0 0x2000000 0x0 0x2000000 0x0 0x2000000>,
+ <0x0 0x20000000 0x0 0x20000000 0x0 0x10000000>,
+ <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>,
+ <0xfe 0x0 0xfe 0x0 0x0 0x40000000>;
+
+ isa@16400000 {
+ compatible = "isa";
+ #size-cells = <1>;
+ #address-cells = <2>;
+ ranges = <1 0x0 0x0 0x16400000 0x4000>;
+ };
+
+ liointc0: interrupt-controller@1fe11400 {
+ compatible = "loongson,liointc-2.0";
+ reg = <0x0 0x1fe11400 0x0 0x40>,
+ <0x0 0x1fe11040 0x0 0x8>;
+ reg-names = "main", "isr0";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ interrupt-names = "int0";
+
+ loongson,parent_int_map = <0xffffffff>, /* int0 */
+ <0x00000000>, /* int1 */
+ <0x00000000>, /* int2 */
+ <0x00000000>; /* int3 */
+ };
+
+ liointc1: interrupt-controller@1fe11440 {
+ compatible = "loongson,liointc-2.0";
+ reg = <0x0 0x1fe11440 0x0 0x40>,
+ <0x0 0x1fe11048 0x0 0x8>;
+ reg-names = "main", "isr0";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&cpuintc>;
+ interrupts = <4>;
+ interrupt-names = "int2";
+
+ loongson,parent_int_map = <0x00000000>, /* int0 */
+ <0x00000000>, /* int1 */
+ <0xffffffff>, /* int2 */
+ <0x00000000>; /* int3 */
+ };
+
+ eiointc: interrupt-controller@1fe11600 {
+ compatible = "loongson,ls2k0500-eiointc";
+ reg = <0x0 0x1fe11600 0x0 0xea00>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&cpuintc>;
+ interrupts = <3>;
+ };
+
+ gmac0: ethernet@1f020000 {
+ compatible = "snps,dwmac-3.70a";
+ reg = <0x0 0x1f020000 0x0 0x10000>;
+ interrupt-parent = <&liointc0>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ status = "disable";
+ };
+
+ gmac1: ethernet@1f030000 {
+ compatible = "snps,dwmac-3.70a";
+ reg = <0x0 0x1f030000 0x0 0x10000>;
+ interrupt-parent = <&liointc0>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ status = "disable";
+ };
+
+ sata: sata@1f040000 {
+ compatible = "snps,spear-ahci";
+ reg = <0x0 0x1f040000 0x0 0x10000>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <75>;
+ status = "disable";
+ };
+
+ ehci0: usb@1f050000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0x1f050000 0x0 0x8000>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <71>;
+ status = "disable";
+ };
+
+ ohci0: usb@1f058000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0x1f058000 0x0 0x8000>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <72>;
+ status = "disable";
+ };
+
+ uart0: serial@1ff40800 {
+ compatible = "ns16550a";
+ reg = <0x0 0x1ff40800 0x0 0x10>;
+ clock-frequency = <100000000>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <2>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ i2c0: i2c@1ff48000 {
+ compatible = "loongson,ls2k-i2c";
+ reg = <0x0 0x1ff48000 0x0 0x0800>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <14>;
+ status = "disabled";
+ };
+
+ i2c@1ff48800 {
+ compatible = "loongson,ls2k-i2c";
+ reg = <0x0 0x1ff48800 0x0 0x0800>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <15>;
+ status = "disabled";
+ };
+
+ i2c@1ff49000 {
+ compatible = "loongson,ls2k-i2c";
+ reg = <0x0 0x1ff49000 0x0 0x0800>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <16>;
+ status = "disabled";
+ };
+
+ i2c@1ff49800 {
+ compatible = "loongson,ls2k-i2c";
+ reg = <0x0 0x1ff49800 0x0 0x0800>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <17>;
+ status = "disabled";
+ };
+
+ i2c@1ff4a000 {
+ compatible = "loongson,ls2k-i2c";
+ reg = <0x0 0x1ff4a000 0x0 0x0800>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <18>;
+ status = "disabled";
+ };
+
+ i2c@1ff4a800 {
+ compatible = "loongson,ls2k-i2c";
+ reg = <0x0 0x1ff4a800 0x0 0x0800>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <19>;
+ status = "disabled";
+ };
+
+ rtc0: rtc@1ff6c100 {
+ compatible = "loongson,ls2k0500-rtc", "loongson,ls7a-rtc";
+ reg = <0x0 0x1ff6c100 0x0 0x100>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <35>;
+ status = "disabled";
+ };
+
+ pcie@1a000000 {
+ compatible = "loongson,ls2k-pci";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ reg = <0x0 0x1a000000 0x0 0x02000000>,
+ <0xfe 0x0 0x0 0x20000000>;
+
+ ranges = <0x2000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>,
+ <0x1000000 0x0 0x4000 0x0 0x16404000 0x0 0x4000>;
+
+ status = "disabled";
+
+ pcie@0,0 {
+ reg = <0x0000 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupt-parent = <&eiointc>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &eiointc 81>;
+ ranges;
+ };
+
+ pcie@1,0 {
+ reg = <0x0800 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupt-parent = <&eiointc>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &eiointc 82>;
+ ranges;
+ };
+ };
+ };
+};
--
2.39.3
