On 20/08/2023 07:23, Abdel Alkuor wrote: > From: Abdel Alkuor <abdelalkuor@xxxxxxxxxx> > > TPS25750 is USB Type-C controller and Power Delivery controller. > > TPS25750 needs to be configured after a cold reset. The configuration > can be applied either from an external EEPROM connected to the > controller or by a host using I2C. TI provides an online GUI that > can be used to generate the configuration binary. > Tool link: https://tinyurl.com/2s3watcm > P.S. It requires a TI account to be able to use the tool. > ... > + > +static void tps25750_remove(struct i2c_client *client) > +{ > + struct tps25750 *tps = i2c_get_clientdata(client); > + > + tps25750_disconnect(tps, 0); > + typec_unregister_port(tps->port); > + usb_role_switch_put(tps->role_sw); > + > + /* clear the patch by a hard reset */ > + tps25750_exec_normal_cmd(tps, TPS_4CC_GAID); > +} > + > +static int __maybe_unused tps25750_suspend(struct device *dev) > +{ > + /* TODO: should we remove the patch? */ > + return 0; > +} > + > +static int __maybe_unused tps25750_resume(struct device *dev) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct tps25750 *tps = i2c_get_clientdata(client); > + > + /* The controller needs to be reinitialized again Format is: /* * The.... > + * if it is powered off as config is not persisted > + */ > + return tps25750_init(tps); > +} > + > +static const struct dev_pm_ops tps25750_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(tps25750_suspend, tps25750_resume) > +}; > + > +static const struct of_device_id tps25750_of_match[] = { > + { .compatible = "ti,tps25750", }, > + {} > +}; > +MODULE_DEVICE_TABLE(of, tps25750_of_match); > + > +static const struct i2c_device_id tps25750_id[] = { > + { "tps25750" }, > + { } > +}; > +MODULE_DEVICE_TABLE(i2c, tps25750_id); > + > +static struct i2c_driver tps25750_i2c_driver = { > + .driver = { > + .name = "tps25750", > + .pm = pm_ptr(&tps25750_pm_ops), > + .of_match_table = of_match_ptr(tps25750_of_match), Drop of_match_ptr(). It will cause warnings. > + }, > + .probe_new = tps25750_probe, > + .remove = tps25750_remove, > + .id_table = tps25750_id, > +}; > +module_i2c_driver(tps25750_i2c_driver); Best regards, Krzysztof
