Re: [PATCH 5/8] phy: exynos5-usbdrd: Add 26MHz ref clk support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 19/08/2023 05:17, Sam Protsenko wrote:
> Modern Exynos chips (like Exynos850) might have 26 MHz OSCCLK external
> clock, which is also used as a PHY reference clock. For some USB PHY
> controllers (e.g USB DRD PHY block on Exynos850) there is no need to set
> the refclk frequency at all (and corresponding bits in CLKRSTCTRL[7:5]
> are marked RESERVED), so that value won't be set in the driver. But
> even in that case, 26 MHz support still has to be added, otherwise
> exynos5_rate_to_clk() fails, which leads in turn to probe error.
> 
> Add the correct value for 26MHz refclk to make it possible to add
> support for new Exynos USB DRD PHY controllers.
> 
> Signed-off-by: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
> ---

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux