Re: [PATCH v4 1/4] clk: qcom: branch: Add clk_branch2_mdio_ops

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 8/18/2023 11:29 AM, Bjorn Andersson wrote:
On Tue, Aug 15, 2023 at 04:52:02PM +0800, Luo Jie wrote:
Add the clk_branch2_mdio_ops for supporting clock controller
where the hardware register is accessed by MDIO bus, and the
spin clock can't be used because of sleep during the MDIO

spin clock?

I believe you're trying to say that the underlying access to the MDIO
bus can not be done in non-sleepable context and we can therefor not use
enable/disable to operate it?

Hi Bjorn,
Thanks for the review comments.
yes, the MDIO operation can't be done in non-sleepable context, and enable/disable clock is using spin lock, so i enable the clock in .prepare ops.

will fix this typo"spin clock" to "spin lock"


operation.

The clock is enabled by the .prepare instead of .enable when
the clk_branch2_mdio_ops is used.

Signed-off-by: Luo Jie <quic_luoj@xxxxxxxxxxx>
---
  drivers/clk/qcom/clk-branch.c | 7 +++++++
  drivers/clk/qcom/clk-branch.h | 1 +
  2 files changed, 8 insertions(+)

diff --git a/drivers/clk/qcom/clk-branch.c b/drivers/clk/qcom/clk-branch.c
index fc4735f74f0f..5e08c026ca4a 100644
--- a/drivers/clk/qcom/clk-branch.c
+++ b/drivers/clk/qcom/clk-branch.c
@@ -153,3 +153,10 @@ const struct clk_ops clk_branch_simple_ops = {
  	.is_enabled = clk_is_enabled_regmap,
  };
  EXPORT_SYMBOL_GPL(clk_branch_simple_ops);
+
+const struct clk_ops clk_branch2_mdio_ops = {
+	.prepare = clk_branch2_enable,
+	.unprepare = clk_branch2_disable,

I see none of the clocks specify halt_check, which would imply that
these two calls just turns into clk_enable_regmap() and
clk_disable_regmap().

So, isn't this then equivalent to clk_branch_simple_ops?

Regards,
Bjorn


Thanks Bjorn for pointing this, i will add the the halt_check in the next patch set, halt_check is applicable.

+	.is_prepared = clk_is_enabled_regmap,
+};
+EXPORT_SYMBOL_GPL(clk_branch2_mdio_ops);
diff --git a/drivers/clk/qcom/clk-branch.h b/drivers/clk/qcom/clk-branch.h
index 0cf800b9d08d..4b006e8eec5e 100644
--- a/drivers/clk/qcom/clk-branch.h
+++ b/drivers/clk/qcom/clk-branch.h
@@ -85,6 +85,7 @@ extern const struct clk_ops clk_branch_ops;
  extern const struct clk_ops clk_branch2_ops;
  extern const struct clk_ops clk_branch_simple_ops;
  extern const struct clk_ops clk_branch2_aon_ops;
+extern const struct clk_ops clk_branch2_mdio_ops;
#define to_clk_branch(_hw) \
  	container_of(to_clk_regmap(_hw), struct clk_branch, clkr)
--
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux