Hi Krzysztof,
Thanks for review, i'll fix them and send v2 soon.
On 15.08.2023 16:45, Krzysztof Kozlowski wrote:
> On 15/08/2023 14:59, Muhammed Efe Cetin wrote:
>> Add initial support for OPi5 that includes support for USB2, PCIe2, Sata,
>> Sdmmc, SPI Flash, PMIC.
>>
>> Signed-off-by: Muhammed Efe Cetin <efectn@xxxxxxxx>
>> ---
>> .../boot/dts/rockchip/rk3588s-orangepi-5.dts | 873 ++++++++++++++++++
>
> Without Makefile this won't be build, so this was not ever tested.
>
>> 1 file changed, 873 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
>> new file mode 100644
>> index 000000000000..85071084a207
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
>> @@ -0,0 +1,873 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +
>> +/dts-v1/;
>> +
>> +#include <dt-bindings/pinctrl/rockchip.h>
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/input/input.h>
>> +#include "rk3588s.dtsi"
>> +
>> +/ {
>> + model = "Xunlong Orange Pi 5";
>> + compatible = "xunlong,orangepi-5", "rockchip,rk3588s";
>> +
>> + aliases {
>> + mmc0 = &sdmmc;
>> + serial2 = &uart2;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial2:1500000n8";
>> + };
>> +
>> + leds {
>> + compatible = "gpio-leds";
>> + pinctrl-names = "default";
>> + pinctrl-0 =<&leds_gpio>;
>> +
>> + led@1 {
>
> Unit address is not correct here, it is not a bus. This should be
> reported as warning, so you did not check for warnings.
>
> It does not look like you tested the DTS against bindings. Please run
> `make dtbs_check W=1` (see
> Documentation/devicetree/bindings/writing-schema.rst or
> https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
> for instructions).
>
>> + gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
>> + label = "status_led";
>> + linux,default-trigger = "heartbeat";
>> + linux,default-trigger-delay-ms = <0>;
>> + };
>> + };
>> +
>> + adc-keys {
>> + compatible = "adc-keys";
>> + io-channels = <&saradc 1>;
>> + io-channel-names = "buttons";
>> + keyup-threshold-microvolt = <1800000>;
>> + poll-interval = <100>;
>> +
>> + vol-up-key {
>> + label = "volume up";
>> + linux,code = <KEY_VOLUMEUP>;
>> + press-threshold-microvolt = <17000>;
>> + };
>> +
>> + vol-down-key {
>> + label = "volume down";
>> + linux,code = <KEY_VOLUMEDOWN>;
>> + press-threshold-microvolt = <417000>;
>> + };
>> +
>> + menu-key {
>> + label = "menu";
>> + linux,code = <KEY_MENU>;
>> + press-threshold-microvolt = <890000>;
>> + };
>> +
>> + back-key {
>> + label = "back";
>> + linux,code = <KEY_BACK>;
>> + press-threshold-microvolt = <1235000>;
>> + };
>> + };
>> +
>> + backlight: backlight {
>> + compatible = "pwm-backlight";
>> + brightness-levels = < 0 20 20 21 21 22 22 23
>> + 23 24 24 25 25 26 26 27
>> + 27 28 28 29 29 30 30 31
>> + 31 32 32 33 33 34 34 35
>> + 35 36 36 37 37 38 38 39
>> + 40 41 42 43 44 45 46 47
>> + 48 49 50 51 52 53 54 55
>> + 56 57 58 59 60 61 62 63
>> + 64 65 66 67 68 69 70 71
>> + 72 73 74 75 76 77 78 79
>> + 80 81 82 83 84 85 86 87
>> + 88 89 90 91 92 93 94 95
>> + 96 97 98 99 100 101 102 103
>> + 104 105 106 107 108 109 110 111
>> + 112 113 114 115 116 117 118 119
>> + 120 121 122 123 124 125 126 127
>> + 128 129 130 131 132 133 134 135
>> + 136 137 138 139 140 141 142 143
>> + 144 145 146 147 148 149 150 151
>> + 152 153 154 155 156 157 158 159
>> + 160 161 162 163 164 165 166 167
>> + 168 169 170 171 172 173 174 175
>> + 176 177 178 179 180 181 182 183
>> + 184 185 186 187 188 189 190 191
>> + 192 193 194 195 196 197 198 199
>> + 200 201 202 203 204 205 206 207
>> + 208 209 210 211 212 213 214 215
>> + 216 217 218 219 220 221 222 223
>> + 224 225 226 227 228 229 230 231
>> + 232 233 234 235 236 237 238 239
>> + 240 241 242 243 244 245 246 247
>> + 248 249 250 251 252 253 254 255>;
>> + default-brightness-level = <200>;
>> + pwms = <&pwm2 0 25000 0>;
>> + };
>> +
>> + backlight_1: backlight_1 {
>
> No underscores in node names, use -
>
>> + compatible = "pwm-backlight";
>> + brightness-levels = < 0 20 20 21 21 22 22 23
>> + 23 24 24 25 25 26 26 27
>> + 27 28 28 29 29 30 30 31
>
> ...
>
>> +
>> +&combphy0_ps {
>> + status = "okay";
>> +};
>> +
>> +&combphy2_psu {
>> + status = "okay";
>> +};
>> +
>> +&cpu_b0 {
>> + cpu-supply = <&vdd_cpu_big0_s0>;
>> + mem-supply = <&vdd_cpu_big0_mem_s0>;
>> +};
>> +
>> +&cpu_b1 {
>> + cpu-supply = <&vdd_cpu_big0_s0>;
>> + mem-supply = <&vdd_cpu_big0_mem_s0>;
>> +};
>> +
>> +&cpu_b2 {
>> + cpu-supply = <&vdd_cpu_big1_s0>;
>> + mem-supply = <&vdd_cpu_big1_mem_s0>;
>> +};
>> +
>> +&cpu_b3 {
>> + cpu-supply = <&vdd_cpu_big1_s0>;
>> + mem-supply = <&vdd_cpu_big1_mem_s0>;
>> +};
>> +
>> +&cpu_l0 {
>> + cpu-supply = <&vdd_cpu_lit_s0>;
>> + mem-supply = <&vdd_cpu_lit_mem_s0>;
>> +};
>> +
>> +&cpu_l1 {
>> + cpu-supply = <&vdd_cpu_lit_s0>;
>> + mem-supply = <&vdd_cpu_lit_mem_s0>;
>> +};
>> +
>> +&cpu_l2 {
>> + cpu-supply = <&vdd_cpu_lit_s0>;
>> + mem-supply = <&vdd_cpu_lit_mem_s0>;
>> +};
>> +
>> +&cpu_l3 {
>> + cpu-supply = <&vdd_cpu_lit_s0>;
>> + mem-supply = <&vdd_cpu_lit_mem_s0>;
>> +};
>> +
>> +&gmac1 {
>> + clock_in_out = "output";
>> + phy-handle = <&rgmii_phy1>;
>> + phy-mode = "rgmii-rxid";
>> + pinctrl-0 = <&gmac1_miim
>> + &gmac1_tx_bus2
>> + &gmac1_rx_bus2
>> + &gmac1_rgmii_clk
>> + &gmac1_rgmii_bus>;
>
> Messed alignment.
>
>> + pinctrl-names = "default";
>> + snps,reset-gpio = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
>> + snps,reset-active-low;
>> + snps,reset-delays-us = <0 20000 100000>;
>> + tx_delay = <0x42>;
>> + status = "okay";
>> +};
>> +
>
> ...
>
>> +
>> +&sfc {
>> + pinctrl-0 = <&fspim0_pins>;
>> + pinctrl-names = "default";
>> + max-freq = <100000000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "okay";
>> +
>> + spi_flash: spi-flash@0 {
>> + compatible = "jedec,spi-nor";
>> + reg = <0x0>;
>> + spi-max-frequency = <100000000>;
>> + spi-tx-bus-width = <1>;
>> + spi-rx-bus-width = <4>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "okay";
>
> okay is by default, was it disabled anywhere?
>
>> +
>> + partitions {
>> + compatible = "fixed-partitions";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> +
>> + loader@0 {
>> + label = "loader";
>> + reg = <0x0 0x1000000>;
>> + };
>> + };
>> + };
>> +};
>> +
>
>
> Best regards,
> Krzysztof
>
Regards,
Efe
