On Thu, Aug 17, 2023 at 05:57:55PM +0300, Muhammed Efe Cetin wrote:
>
> Hi, Ondřej
>
> On 17.08.2023 16:57, Ondřej Jirman wrote:
> > Hi Muhammed,
> >
> >>>> [...]
> >>>
> >>>> + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
> >>>> + compatible = "regulator-fixed";
> >>>> + regulator-name = "vcc_1v1_nldo_s3";
> >>>> + regulator-always-on;
> >>>> + regulator-boot-on;
> >>>> + regulator-min-microvolt = <1100000>;
> >>>> + regulator-max-microvolt = <1100000>;
> >>>> + vin-supply = <&vcc5v0_sys>;
> >>>> + };
> >>>
> >>> There's no such regulator on the board.
> >>
> >> It's connected to PMIC https://i.imgur.com/sVJdC5K.png
> >
> > It's not a separate fixed regulator. It's a PMIC output from buck6 https://megous.com/dl/tmp/8630fa17407c75b9.png
> >
>
> I think it should be fixed regulator. It's used as vcc13-supply and
> vcc14-supply regulator on PMIC and it's same as other rk3588 boards.
Yes, BUCK6 output is input to some LDOs. If you make this a regulator-fixed,
BUCK6 will not get enabled when those LDOs are enabled, and the LDOs will not
work because they'll lack input power.
Your regulator-fixed does nothing to enable BUCK6 which is where vcc_1v1_nldo_s3
power rail is connected.
It only works for you now, because dcdc-reg6 is marked as regulator-always-on,
so it's already enabled when you need those dependent LDOs.
regards,
o.
> > So this is VDD2_DDR_S3. If you want to keep the alias, just add extra alias to
> > dcdc-reg6 like this:
> >
> > ...
> > vcc_1v1_nldo_s3: vdd2_ddr_s3: dcdc-reg6 {
> > ...
> >
> >>>
