[PATCH v3 1/2] arm64: dts: qcom: sm8550: add UART14 nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the Geni High Speed UART QUP instance 2 element 6
node and associated default pinctrl.

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8550.dtsi | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index d115960bdeec..4be10a9bf933 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -1054,6 +1054,20 @@ spi13: spi@894000 {
 				status = "disabled";
 			};
 
+			uart14: uart@898000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x898000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>;
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
 			i2c15: i2c@89c000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x0089c000 0 0x4000>;
@@ -3498,6 +3512,22 @@ qup_uart7_default: qup-uart7-default-state {
 				bias-disable;
 			};
 
+			qup_uart14_default: qup-uart14-default-state {
+				/* TX, RX */
+				pins = "gpio78", "gpio79";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_uart14_cts_rts: qup-uart14-cts-rts-state {
+				/* CTS, RTS */
+				pins = "gpio76", "gpio77";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			sdc2_sleep: sdc2-sleep-state {
 				clk-pins {
 					pins = "sdc2_clk";

-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux