On Tue, May 30, 2023 at 09:51:27PM +0200, Bernhard Rosenkränzer wrote: > From: Balsam CHIHI <bchihi@xxxxxxxxxxxx> > > Add full LVTS support (MCU thermal domain + AP thermal domain) to MediaTek MT8192 SoC. > Also, add Suspend and Resume support to LVTS Driver (all SoCs), > and update the documentation that describes the Calibration Data Offsets. > > Changelog: > v4 : > - Shrink the lvts_ap thermal sensor I/O range to 0xc00 to make > room for SVS support, pointed out by > AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> > > v3 : > - Rebased : > base-commit: 6a3d37b4d885129561e1cef361216f00472f7d2e > - Fix issues in v2 pointed out by Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>: > Use filtered mode to make sure threshold interrupts are triggered, > protocol documentation, cosmetics > - I (bero@xxxxxxxxxxxx) will be taking care of this patchset > from now on, since Balsam has left BayLibre. Thanks for > getting it almost ready, Balsam! > > v2 : > - Based on top of thermal/linux-next : > base-commit: 7ac82227ee046f8234471de4c12a40b8c2d3ddcc > - Squash "add thermal zones and thermal nodes" and > "add temperature mitigation threshold" commits together to form > "arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones" commit. > - Add Suspend and Resume support to LVTS Driver. > - Update Calibration Data documentation. > - Fix calibration data offsets for mt8192 > (Thanks to "Chen-Yu Tsai" and "Nícolas F. R. A. Prado"). > https://lore.kernel.org/all/20230425133052.199767-1-bchihi@xxxxxxxxxxxx/ > Tested-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx> > > v1 : > - The initial series "Add LVTS support for mt8192" : > "https://lore.kernel.org/all/20230307163413.143334-1-bchihi@xxxxxxxxxxxx/";. > > Balsam CHIHI (5): > dt-bindings: thermal: mediatek: Add LVTS thermal controller definition > for mt8192 > thermal/drivers/mediatek/lvts_thermal: Add suspend and resume > thermal/drivers/mediatek/lvts_thermal: Add mt8192 support > arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones > thermal/drivers/mediatek/lvts_thermal: Update calibration data > documentation > > arch/arm64/boot/dts/mediatek/mt8192.dtsi | 454 ++++++++++++++++++ > drivers/thermal/mediatek/lvts_thermal.c | 160 +++++- > .../thermal/mediatek,lvts-thermal.h | 19 + > 3 files changed, 631 insertions(+), 2 deletions(-) > > base-commit: 8c33787278ca8db73ad7d23f932c8c39b9f6e543 Hi Daniel, just a gentle reminder. As you've just applied [1], there are no longer any concerns with this series, and it'll provide both working interrupts and reliable thermal readings on MT8192. Thanks, Nícolas [1] https://lore.kernel.org/all/89fabd50-66ce-d94f-38c8-6dd6f343958d@xxxxxxxxxx
