Re: [PATCH v2 2/3] arm64: dts: qcom: sm8450: Add opp table support to PCIe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 16 Aug 2023 at 16:25, Krishna chaitanya chundru
<quic_krichai@xxxxxxxxxxx> wrote:
>
> PCIe needs to choose the appropriate performance state of RPMH power
> domain based upon the PCIe gen speed.
>
> So let's add the OPP table support to specify RPMH performance states.
>
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sm8450.dtsi | 47 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 47 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index 595533a..c77a683 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -1803,7 +1803,28 @@
>                         pinctrl-names = "default";
>                         pinctrl-0 = <&pcie0_default_state>;
>
> +                       operating-points-v2 = <&pcie0_opp_table>;
> +
>                         status = "disabled";
> +
> +                       pcie0_opp_table: opp-table {
> +                               compatible = "operating-points-v2";
> +
> +                               opp-2500000 {

As a random suggestion: these frequencies are calculated by the
driver. It might be easier to use opp-level for the PCIe generation
instead.

This way this OPP entry can become:

opp-1 {
    opp-level = <1>;
    required-opps = <&rpmhpd_opp_low_svs>;
};

> +                                       opp-hz = /bits/ 64 <2500000>;
> +                                       required-opps = <&rpmhpd_opp_low_svs>;
> +                               };
> +
> +                               opp-5000000 {
> +                                       opp-hz = /bits/ 64 <5000000>;
> +                                       required-opps = <&rpmhpd_opp_low_svs>;
> +                               };
> +
> +                               opp-8000000 {
> +                                       opp-hz = /bits/ 64 <8000000>;
> +                                       required-opps = <&rpmhpd_opp_nom>;
> +                               };
> +                       };
>                 };
>
>                 pcie0_phy: phy@1c06000 {
> @@ -1915,7 +1936,33 @@
>                         pinctrl-names = "default";
>                         pinctrl-0 = <&pcie1_default_state>;
>
> +                       operating-points-v2 = <&pcie1_opp_table>;
> +
>                         status = "disabled";
> +
> +                       pcie1_opp_table: opp-table {
> +                               compatible = "operating-points-v2";
> +
> +                               opp-2500000 {
> +                                       opp-hz = /bits/ 64 <2500000>;
> +                                       required-opps = <&rpmhpd_opp_low_svs>;
> +                               };
> +
> +                               opp-5000000 {
> +                                       opp-hz = /bits/ 64 <5000000>;
> +                                       required-opps = <&rpmhpd_opp_low_svs>;
> +                               };
> +
> +                               opp-8000000 {
> +                                       opp-hz = /bits/ 64 <8000000>;
> +                                       required-opps = <&rpmhpd_opp_low_svs>;
> +                               };
> +
> +                               opp-16000000 {
> +                                       opp-hz = /bits/ 64 <16000000>;
> +                                       required-opps = <&rpmhpd_opp_nom>;
> +                               };
> +                       };
>                 };
>
>                 pcie1_phy: phy@1c0f000 {
> --
> 2.7.4
>


-- 
With best wishes
Dmitry



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux