On 20/06/2023 03:29, Yinbo Zhu wrote:
This patch adds the support for Loongson-2 thermal sensor controller,
which can support maximum four sensor selectors that corresponding to four
sets of thermal control registers and one set of sampling register. The
sensor selector can selector a speific thermal sensor as temperature input.
The sampling register is used to obtain the temperature in real time, the
control register GATE field is used to set the threshold of high or low
temperature, when the input temperature is higher than the high temperature
threshold or lower than the low temperature threshold, an interrupt will
occur.
Signed-off-by: zhanghongchen <zhanghongchen@xxxxxxxxxxx>
Signed-off-by: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
---
[ ... ]
+ if (devm_thermal_add_hwmon_sysfs(dev, tzd))
+ dev_warn(dev, "Failed to add hwmon sysfs attributes\n");
[ ... ]
This has been factored out by adding a message directly in
devm_thermal_add_hwmon_sysfs(), so the test is not needed here neither
the message.
However, these changes have been long enough on the mailing list and the
result looks nice.
I can pick this patch and you provide a small patch on top. Or you send
a V16 with this change. It is your call.
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
