Hi Claudiu,
----------------------
Hi, Mihai,
On 8/10/23 09:47, Mihai.Sain@xxxxxxxxxxxxx wrote:
>> +&i2s0 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_i2s0_default>;
>> + status = "okay";
> I see no sound bindings on DT. Is there any reason for having this here?
> # i2s0 bus is wired to RPi 40-pin connector. I want to have this node and its pinctrl here.
> # i2c1, flx4-spi, pwm0, uart1 are also wired to Rpi connector, and are defined here.
> # The same logic we apply also for mikroBUS sockets: i2c, pwm, spi and uart nodes are defined here.
>
Can you use it (either with user space tools or other kernel consumers) w/o additional device tree bindings?
# Yes. We have added in dt-overlay the codec which uses the i2s0 and i2c1 nodes and pinctrls.
