Hi Shawn, Am Samstag, 12. August 2023, 03:44:14 CEST schrieb Shawn Guo: > On Thu, Aug 10, 2023 at 11:55:40AM +0200, Alexander Stein wrote: > > Numbers are separated by dashes. Fixes the warnings: > > arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2-mba6ulx.dtb: gpio-keys: > > 'button1', 'button2', 'button3' do not match any of the regexes: > > '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+ > > -(button|event|key|switch))$', 'pinctrl-[0-9]+'> > > from schema $id: http://devicetree.org/schemas/input/gpio-keys.yaml# > > > > Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx> > > It doesn't apply to my imx/dt branch. Oh, thanks for noticing. A dependent patch was missing and has been included in v2. Thanks and best regards, Alexander > Shawn > > > --- > > > > arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi | 6 +++--- > > 1 file changed, 3 insertions(+), 3 deletions(-) > > > > diff --git a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi > > b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi index 632ceadcca41..5a8b867d7d79 > > 100644 > > --- a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi > > +++ b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi > > @@ -35,21 +35,21 @@ gpio_buttons: gpio-keys { > > > > pinctrl-names = "default"; > > pinctrl-0 = <&pinctrl_buttons>; > > > > - button1 { > > + button-1 { > > > > label = "s14"; > > linux,code = <KEY_1>; > > gpios = <&expander_in0 0 GPIO_ACTIVE_LOW>; > > wakeup-source; > > > > }; > > > > - button2 { > > + button-2 { > > > > label = "s6"; > > linux,code = <KEY_2>; > > gpios = <&expander_in0 1 GPIO_ACTIVE_LOW>; > > wakeup-source; > > > > }; > > > > - button3 { > > + button-3 { > > > > label = "s7"; > > linux,code = <KEY_3>; > > gpios = <&expander_in0 2 GPIO_ACTIVE_LOW>; -- TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany Amtsgericht München, HRB 105018 Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider http://www.tq-group.com/
