Re: [PATCH v8 0/4] Add display support on the stm32f746-disco board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Dario

On 8/14/23 15:28, Dario Binacchi wrote:
The series adds support for the display on the stm32f746-disco board.

Changes in v8:
- Add the patch [3/4] "ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco" to
   th series.
- Add the 'power-supply' property to panel-rgb node.
- Move backlight and panel-rgb nodes after the vcc-3v3 node.

Changes in v7:
- Add 'Reviewed-by' tags I forgot in v6.
   https://lore.kernel.org/linux-arm-kernel/20230629083726.84910-1-dario.binacchi@xxxxxxxxxxxxxxxxxxxx/T/

Changes in v6:
- Remove dma nodes from stm32f746-disco.dts, they are not used by LTDC,
   so there is no need to enable them.

Changes in v5:
I am confident that framebuffer sizing is a real requirement for STM32 boards,
but I need some time to understand if and how to introduce this functionality.
Therefore, I drop the following patches to allow the series to be fully merged:
  - [4/6] dt-bindings: display: stm32-ltdc: add optional st,fb-bpp property
  - [5/6] ARM: dts: stm32: set framebuffer bit depth on stm32f746-disco
  - [6/6] drm/stm: set framebuffer bit depth through DTS property

Changes in v4:
- Use DTS property instead of module parameter to set the framebuffer bit depth.

Changes in v3:
- rename ltdc-pins-a-0 to ltdc-0.
- drop [4/6] dt-bindings: display: simple: add Rocktech RK043FN48H
   Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next):
   https://cgit.freedesktop.org/drm/drm-misc/commit/?id=c42a37a27c777d63961dd634a30f7c887949491a
- drop [5/6] drm/panel: simple: add support for Rocktech RK043FN48H panel
   Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)
   https://cgit.freedesktop.org/drm/drm-misc/commit/?id=13cdd12a9f934158f4ec817cf048fcb4384aa9dc

Dario Binacchi (4):
   ARM: dts: stm32: add ltdc support on stm32f746 MCU
   ARM: dts: stm32: add pin map for LTDC on stm32f7
   ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
   ARM: dts: stm32: support display on stm32f746-disco board

  arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi | 35 ++++++++++++++++
  arch/arm/boot/dts/st/stm32f746-disco.dts  | 50 +++++++++++++++++++++--
  arch/arm/boot/dts/st/stm32f746.dtsi       | 10 +++++
  3 files changed, 92 insertions(+), 3 deletions(-)


Series applied on stm32-next.

Thanks!!
Alex



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux