A couple device-tree updates for pocketbeagle: 1) Update the LED information (the LED on the pocketbeagle is blue, so correct the information). Also the "label" property is deprecated so replace it with "color" and "function" properties. 2) Now that mainline supports the PRUs via remoteproc, update the pin information to enable the PRU pins and set their mode appropriately as per the silkscreen. 3) Add a missing mode setting for a GPIO pin. Trevor Woerner (3): ARM: dts: am335x-pocketbeagle: update LED information ARM: dts: am335x-pocketbeagle: enable pru ARM: dts: am335x-pocketbeagle: add missing GPIO mux .../boot/dts/ti/omap/am335x-pocketbeagle.dts | 59 ++++++++++++++++--- 1 file changed, 50 insertions(+), 9 deletions(-) -- 2.41.0.327.gaa9166bcc0ba
