A previous patch removed the audio PLL configuration from the clk
node, which resulted in an incorrect clock rate when attempting
to playback audio. Fix this by setting the AUDIO_PLL2 rate inside
the SAI3 node since it's the SAI3 that needs it.
Fixes: 16c984524862 ("arm64: dts: imx8mp: don't initialize audio clocks from CCM node")
Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
Reviewed-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
---
V2: No change
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
index 06e91297fb16..acd265d8b58e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
@@ -381,9 +381,10 @@ &pcie_phy {
&sai3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai3>;
- assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+ assigned-clocks = <&clk IMX8MP_CLK_SAI3>,
+ <&clk IMX8MP_AUDIO_PLL2> ;
assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
- assigned-clock-rates = <12288000>;
+ assigned-clock-rates = <12288000>, <361267200>;
fsl,sai-mclk-direction-output;
status = "okay";
};
--
2.39.2
